قطعات پسیو (غیرفعال) سلف، سیم‌پیچ و چوک خط تأخیر

Product Attributes

Introduction

The SY89296U is a programmable delay line that delays the input signal using a digital control signal. The delay can vary from 3.2ns to 14.8ns in 10ps increments. Further, the delay may be varied continuously in about 40ps range by setting the voltage at the FTUNE pin. In addition, the input signal is LVPECL, uses either a 2.5V±5% or 3.3V ±10% power supply, and is guaranteed over the full industrial temperature range -40°C to +85°C. The delay varies in discrete steps based on a control word. The control word is 10-bits long and controls the delay in 10ps increments. The eleventh bit is D[10] and is used to simultaneously cascade the SY89296U for a larger delay range. In addition, the input pins IN and /IN default to an equivalent low state when left floating. Further, for maximum flexibility, the control register interface accepts CMOS or TTL level signals. For applications that do not require an analog delay input, see the SY89295U.

Features

• Precision LVPECL programmable delay time
• Guaranteed AC performance over temperature and voltage: >1.5GHz fMAX <160ρs rise/fall times
• Low jitter design: <10psPP total jitter <2psRMS cycle-to-cycle jitter <1psRMS random jitter
• Programmable delay range: 3.2ns to 14.8ns in 10ps increments
• Increased monotonicity over the MC100EP195
• ±10ps INL
• VBB output reference voltage
• Parallel inputs accept LVPECL or CMOS/LVTTL
• 40ps/V fine tune range
• Low voltage operation: 2.5V±5% and 3.3V±10%
• Industrial -40°C to +85°C temperature range
• Available in 32-pin (5mm×5mm) MLF package or 32-pin TQFP package

Applications

• Clock de-skewing
• Timing adjustments
• Aperture centering