قطعات پسیو (غیرفعال) فیلتر فیلتر ای‌ام‌آی و آر‌اف‌آی (ال‌سی، آر‌سی)

Product Attributes

Introduction

The EClampTM2410P is combination EMI filter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces. This state-of-the-art device utilizes solid-state silicon-avalanche technology for superior clamping performance and DC electrical characteristics. They have been optimized for protection of TFlash/MicroSD interfaces in cellular phones and other portable electronics. The device consists of six circuits that include series impedance matching resistors and pull up resistors as required by the SD specification. TVS diodes are included on each line for ESD protection. An additional TVS diode connection is included for protection of the voltage (Vdd) bus. Termination resistor value of 45 Ohms is included on the DAT0, DAT1, DAT2, DAT3, CMD, and CLK lines. Pull up resistors of 15k Ohms are included on DAT0, DAT1, DAT2, and CMD lines while a 50k Ohm pull up is included on the DAT3 line. These may be configured for devices operating in SD or SPI mode. The TVS diodes provide effective suppression of ESD voltages in excess of ±15KV (air discharge) and ±8KV (contact discharge) per IEC 61000-4-2, level 4. The EClamp2410P is in a 16-pin, RoHS/WEEE compliant, SLP4016P16 package. It measures 4.0×1.6x 0.58mm. The leads are spaced at a pitch of 0.5mm and are finished with lead-free NiPd.

Features

• Bidirectional EMI/RFI filtering and line termination with integrated ESD protection
• ESD protection to IEC 61000-4-2 (ESD) Level 4, ±15kV (air), ±8kV (contact)
• TVS working voltage: 5V
• Termination Resistors: 45Ω
• Pull Up Resistors: 15KΩ (3 each) and 50kΩ
• Typical Capacitance per Line: 12pF (VR=2.5V)
• Protection and termination for six lines + Vdd
• Solid-state technology

Applications

• T-Flash / MicroSD Interfaces
• MMC Interfaces
• CDMA, GSM, 3G Cell Phones