ارسال سریع به سراسر ایران پشتیبانی 24/7
ANPEC APL5934DKAI-TRG

مدار مجتمع (آی سی) آی‌سی مدیریت توان (پی‌ام‌آی‌سی) رگولاتور ولتاژ خطی و کم‌افت (ال دی او)

ANPEC APL5934DKAI-TRG

Manufacturer ANPEC
Mfr. Part Number APL5934DKAI-TRG
Electland Part Code 842983
Electland Part Number NYE_APL5934DKAI-TRG
Category Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
Description Positive Adjustable SOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS

Product Attributes

Category Integrated Circuits (ICs) Power Management (PMIC) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
Output Configuration Positive
Output Type Adjustable
Operating Temperature -40℃~+85℃@(Ta)
Number of Outputs 1
Features Enable control;Built-in soft-start;Operating status indication;Reset function;Over Current Protection;Short Circuit Protection;Thermal shutdown;Output discharge
Output Current 3A
Supply Current (Iq) 100uA
Operating Voltage 5.5V
Packaging SOP-8-EP
Weight 0.1265g

Introduction

Ultra Low Dropout - 0.23V(typical) at 3A Output Current. Low ESR Output Capacitor (Multi-layer Chip Capacitors (MLCC)) Applicable. 0.8V Reference Voltage. High Output Accuracy - ±1.5% over Line, Load, and Temperature Range. Fast Transient Response. Adjustable Output Voltage. Power-On-Reset Monitoring on Both VCNTL and VIN Pins. Internal Soft-Start. Current-Limit and Short Current-Limit Protections. Thermal Shutdown with Hysteresis. Open-Drain VOUT Voltage Indicator (POK). Low Shutdown Quiescent Current. Shutdown/Enable Control Function. Simple SOP-8P and TDFN3x3-10 Packages with Exposed Pad. Lead Free and Green Devices Available (RoHS Compliant). The APL5934 is a 3A ultra low dropout linear regulator. The IC needs two supply voltages, one is a control voltage (VCNTL) for the control circuitry, the other is a main supply voltage (VIN) for power conversion, to reduce power dissipation and provide extremely low dropout voltage. The APL5934/B integrates many functions. A Power-OnReset (POR) circuit monitors both supply voltages on VCNTL and VIN pins to prevent erroneous operations. The functions of thermal shutdown and current-limit protect the device against thermal and current over-loads. A POK indicates the output voltage status with a delay time set internally. It can control other converter for power sequence. The APL5934/B can be enabled by other power systems. Pulling and holding the EN/ENB voltage below 0.4V shut/enable off the output. The APL5934 is available in a SOP-8P package which features small size as SOP-8 and an Exposed Pad to reduce the junction-to-case resistance to extend power range of applications.

Features

  • Ultra Low Dropout - 0.23V(typical) at 3A Output Current
  • Low ESR Output Capacitor (Multi-layer Chip Capacitors (MLCC)) Applicable
  • 0.8V Reference Voltage
  • High Output Accuracy - ±1.5% over Line, Load, and Temperature Range
  • Fast Transient Response
  • Adjustable Output Voltage
  • Power-On-Reset Monitoring on Both VCNTL and VIN Pins
  • Internal Soft-Start
  • Current-Limit and Short Current-Limit Protections
  • Thermal Shutdown with Hysteresis
  • Open-Drain VOUT Voltage Indicator (POK)
  • Low Shutdown Quiescent Current
  • Shutdown/Enable Control Function
  • Simple SOP-8P and TDFN3x3-10 Packages with Exposed Pad
  • Lead Free and Green Devices Available (RoHS Compliant)

Applications

  • Front Side Bus VTT (1.2V/3A)
  • Note Book PC Applications
  • Motherboard Applications

In-Stock Suppliers

NoyanElectronic
8754 in stock
Supplier Part Number: NYE_APL5934DKAI-TRG

1 1
QTY USD TOMAN
1+$0.123734,350 تومان
500+$0.107629,880 تومان

Qty in reel: 2500pcs/reel