| Manufacturer | ANPEC |
|---|---|
| Mfr. Part Number | APL5934DKAI-TRG |
| Electland Part Code | 842983 |
| Electland Part Number | NYE_APL5934DKAI-TRG |
| Category | Voltage Regulators - Linear, Low Drop Out (LDO) Regulators |
| Description | Positive Adjustable SOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS |
| Category | Integrated Circuits (ICs) Power Management (PMIC) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators |
|---|---|
| Output Configuration | Positive |
| Output Type | Adjustable |
| Operating Temperature | -40℃~+85℃@(Ta) |
| Number of Outputs | 1 |
| Features | Enable control;Built-in soft-start;Operating status indication;Reset function;Over Current Protection;Short Circuit Protection;Thermal shutdown;Output discharge |
| Output Current | 3A |
| Supply Current (Iq) | 100uA |
| Operating Voltage | 5.5V |
| Packaging | SOP-8-EP |
| Weight | 0.1265g |
Ultra Low Dropout - 0.23V(typical) at 3A Output Current. Low ESR Output Capacitor (Multi-layer Chip Capacitors (MLCC)) Applicable. 0.8V Reference Voltage. High Output Accuracy - ±1.5% over Line, Load, and Temperature Range. Fast Transient Response. Adjustable Output Voltage. Power-On-Reset Monitoring on Both VCNTL and VIN Pins. Internal Soft-Start. Current-Limit and Short Current-Limit Protections. Thermal Shutdown with Hysteresis. Open-Drain VOUT Voltage Indicator (POK). Low Shutdown Quiescent Current. Shutdown/Enable Control Function. Simple SOP-8P and TDFN3x3-10 Packages with Exposed Pad. Lead Free and Green Devices Available (RoHS Compliant). The APL5934 is a 3A ultra low dropout linear regulator. The IC needs two supply voltages, one is a control voltage (VCNTL) for the control circuitry, the other is a main supply voltage (VIN) for power conversion, to reduce power dissipation and provide extremely low dropout voltage. The APL5934/B integrates many functions. A Power-OnReset (POR) circuit monitors both supply voltages on VCNTL and VIN pins to prevent erroneous operations. The functions of thermal shutdown and current-limit protect the device against thermal and current over-loads. A POK indicates the output voltage status with a delay time set internally. It can control other converter for power sequence. The APL5934/B can be enabled by other power systems. Pulling and holding the EN/ENB voltage below 0.4V shut/enable off the output. The APL5934 is available in a SOP-8P package which features small size as SOP-8 and an Exposed Pad to reduce the junction-to-case resistance to extend power range of applications.
| QTY | USD | TOMAN |
|---|---|---|
| 1+ | $0.1237 | 34,350 تومان |
| 500+ | $0.1076 | 29,880 تومان |