مدار مجتمع (آی سی) آی‌سی مدیریت توان (پی‌ام‌آی‌سی) سوییچ توزیع توان و درایور بار

Product Attributes

Introduction

The TP600X is a low voltage, single P-MOSFET high-side power switch, optimized for self-powered and bus- powered Universal Serial Bus (USB) applications. The TP600X equipped with a charge pump circuitry to drive the internal MOSFET switch; the switch's low RDS(ON) 80mΩ meets USB voltage drop requirements; and a flag output is available to indicate fault conditions to the local USB controller. Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. lower quiescent current as 20uA making this device ideal for portable battery-operated equipment. The TP600XA is available in SOT23-5L package requiring minimum board space and smallest components.

Features

• Wide Input Voltage Ranges : 2.4V to 5.5V
• Compliant to USB Specifications
• Typical Rps(ON) 80mΩ
• 1.9V Typical Under-Voltage Lockout (UVLO)
• Low Supply Current : 20uA Typical at Switch on State, 1uA Typical at Switch off State
• Current Limiting Protection
• Thermal Shutdown Protection
• Output Can Be Forced Higher Than Input (Off-State)

Applications

• USB Bus/Self Powered Hubs
• USB Peripherals
• ACPI Power Distribution
• PC Card Hot Swap
• Notebook, Motherboard PCs
• Battery-Powered Equipment
• Hot-Plug Power Supplies
• Battery-Charger Circuits