مدار مجتمع (آی سی) آی‌سی خطی (آنالوگ) پردازش ویدئو

Product Attributes

Introduction

The LMH1983 is a highly-integrated programmable audio/video (A/V) clock generator intended for broadcast and professional applications. It can replace multiple PLLs and VCXOs used in applications supporting SMPTE serial digital video (SDI) and digital audio AES3/EBU standards. It offers low-jitter reference clocks for any SDI transmitter to meet stringent output jitter specifications without additional clock cleaning circuits. The LMH1983 features automatic input format detection, simple programming of multiple A/V output formats, genlock or digital free-run modes, and override programmability of various automatic functions. The recognized input formats include HVF syncs for the major video standards, 27 MHz, 10 MHz, and 32/44.1/48/96 kHz audio word clocks. The dual-stage PLL architecture integrates four PLLs with three on-chip VCOs. The first stage (PLL1) uses an external low-noise 27 MHz VCXO with narrow loop bandwidth to provide a clean reference clock for the next stage. The second stage (PLL2, 3, 4) consists of three parallel VCO PLLs for simultaneous generation of the major digital A/V clock fundamental rates, including 148.5 MHz, 148.5/1.001 MHz, and 98.304 MHz (4 × 24.576 MHz). Each PLL can generate a clock and a timing pulse to indicate top of frame (TOF). When locked to reference, an internal 10-bit ADC will track the loop filter control voltage. When a loss of reference (LOR) occurs, the LMH1983 can be programmed to hold the control voltage to maintain output accuracy within ±0.5 ppm (typical) of the previous reference. The LMH1983 can be configured to re-synchronize to a previous reference with glitch-less operation.

Features

• Four PLLs for Simultaneous A/V Clock Generation
• PLL1: 27 or 13.5 MHz PLL2: 148.5 or 74.25 MHz PLL3: 148.5/1.001 or 74.25/1.001 MHz PLL4: 98.304 MHz / 2^X [X = 0 to 15)
• Flexible PLL Bandwidth to Optimize Jitter Performance and Lock Time
• Soft Resynchronization to New Reference
• Digital Holdover or Free-run on Loss of Reference
• Status Flags for Loss of Reference and Loss of PLL Lock
• 3.3 V Single Supply Operation
• I²C Interface with Address Select Pin (3 States)

Applications

• Triple Rate (3G/HD/SD) SDI SerDes
• FPGA Reference Clock Generation/Cleaning
• Audio Embed or De-embed
• Video Cameras
• Frame Synchronizers (Genlock, DARS)
• A-D or D-A Conversion, Editing, Processing Cards
• Keyers and Logo Inserters
• Format or Standards Converters
• Video Displays and Projectors
• A/V Test and Measurement Equipment