مدار مجتمع (آی سی) آی‌سی واسط ارتباطی کنترلر واسط

FTDI FT232HL-TRAY

Manufacturer	FTDI
Mfr. Part Number	FT232HL-TRAY
Electland Part Code	737884
Electland Part Number	NYE_FT232HL-TRAY
Category	Interface Controllers
Description	USB Bridge, USB to UART,FIFO USB 2.0 UART, FIFO Interface 48-LQFP (7x7)

Product Attributes

Category	Integrated Circuits (ICs) Interface Interface Controllers
Package / Case	48-LQFP
function	Bridge, USB to UART,FIFO
Operating Temperature	-40℃~+85℃
Voltage - Supply	1.62V~1.98V;2.97V~3.63V
interface	UART, FIFO
Features	Hardware flow control support;Programmable baud rate;Power-on reset;FIFO buffer;Wake-up function
Number of Channels	1
Data Rate	480Mbps
Current - Supply	24mA
Protocol	USB
Supplier Device Package	48-LQFP (7x7)
Standards	USB 2.0
USB Protocol	USB 2.0
Applications Function	USB to UART;USB to FIFO
Packaging	LQFP-48(7x7)
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	EAR99
HtsusCode	8542.39.0070
Weight	1.42g

Introduction

The FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.

Features

Single channel USB to serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I²Cν, SPI (MASTER) or bit-bang) design.
UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.
USB to synchronous 245 parallel FIFO mode for transfers up to 40 Mbytes/Sec
Supports a proprietary half duplex FT1248 interface with a configurable width, bidirectional data bus (1, 2, 4 or 8 bits wide). CPU-style FIFO interface mode simplifies CPU interface design.
Fast serial interface option.
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Adjustable receive buffer timeout. Option for transmit and receive LED drive signals.
Bit-bang Mode interface option with RD# and WR# strobes
Highly integrated design includes 5V to 3.3/+1.8V LDO regulator for VCORE, integrated POR function
Asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
Fully assisted hardware or X-On / X-Off software handshaking.
UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
Auto transmit enable control for RS485 serial applications using the TXDEN pin.
Operational mode configuration and USB Description strings configurable in external EEPROM over the USB interface.
Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate.
Low operating and USB suspend current.
Supports self-powered, bus powered and highpower bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible. USB Bulk data transfer mode (512 byte packets in Hi-Speed mode).
+1.8V (chip core) and +3.3V I/0 interfacing +5V Tolerant.
Extended -40°C to 85°C industrial operating temperature range.
Compact 48-pin Lead Free LQFP or QFN package
Configurable ACBUS I/O pins.