مدار مجتمع (آی سی) آی‌سی تعبیه‌شده (پردازنده) ماژول میکروکنترلر، پردازنده و اف‌پی‌جی‌ای

Product Attributes

Introduction

The MitySOM-A10S is a highly configurable, medium form-factor System-on-Module (SOM) featuring an Intel Arria 10 System-on-Chip (SoC). In addition to the processor, the module includes on-board power supplies, two DDR4 RAM memory subsystems, optional eMMC, micro SD card, a fan controller, RTC, a USB 2.0 on the go (OTG) port, and a temperature sensor. The MitySOM-A10S provides a complete and flexible CPU infrastructure for highly integrated embedded systems. The MitySOM-A10S is available with a 270 K Logic Element (KLE) Arria 10 SX which provides Dualcore Cortex-A9 32-bit RISC processors with dual NEON SIMD coprocessors. Options for 160 and 480 KLE devices are also available. This MPU can run a rich set of real-time operating systems containing software applications programming interfaces (APIs) expected by modern system designers. The ARM architecture supports several operating systems, including Linux.

Features

• Intel Arria 10 SX Processor Dual ARM Cortex - A9 MPU Up to 1500 MHz Max clock speed
• Dual NEON SIMD Coprocessors
• 32 KB L1 Program Cache (per core)
• 32 KB L1 Data Cache (per core)
• 512 KB L2 Cache (shared)
• 256 KB on - chip RAM
• Up to 138 User FPGA I/O Pins
• Up to 30 Shared HPS/FPGA I/O Pins
• Up to 4 additional HPS Only Pins
• Twelve 11.3 Gbps Transceiver Pairs
• Memory Interfaces Bank 1: Up to 4 GB DDR4, 32 bits wide, 8.5 GB/sec burst transfer rate, Shared with HPS
• Memory Interfaces Bank 2: Up to 2 GB DDR4, 16 bits wide, 4.24 GB/sec burst transfer rate, Dedicated to FPGA
• Integrated Power Management
• JTAG connector on - module
• On Board USB 2.0 PHY
• On Board MicroSD Connector
• Optional eMMC
• On Board RTC
• 2 On Board Temperature Sensors Power, Reset and Clock Management
• Up To 480K Logic Elements (LE)
• 460Mhz Global Clock
• Up To 28Mb M20K Memory
• Up To 4.3Mb MLAB Memory
• Up To 1368 Floating Point Multipliers
• Up To 2736 Fixed Point Multipliers
• 32 Global Clock Networks
• Twelve 11.3 Gbps Transceivers
• 1 x8 PCIe Hard IP Block (Up to Gen 3)
• 1 x4 Bonded Set
• Up to 3 10/100/1000 Mbps Ethernet MACs
• 1 USB 2.0 OTG Port
• Up to 2 UARTs
• 1 MMC/SD/SDIO
• Up to 2 SPI Masters and 2 SPI Slaves
• Up to 3 I2C controllers

Applications

• Machine Vision
• Life Science Vision applications
• Test and Measurement
• Embedded Instrumentation
• Industrial Automation and Control
• Industrial Instrumentation
• Medical Instrumentation