مدار مجتمع (آی سی) آی‌سی تعبیه‌شده (پردازنده) ماژول میکروکنترلر، پردازنده و اف‌پی‌جی‌ای

MICROCHIP ATSAMA5D27-WLSOM1

Manufacturer	MICROCHIP
Mfr. Part Number	ATSAMA5D27-WLSOM1
Electland Part Code	726530
Electland Part Number	NYE_ATSAMA5D27-WLSOM1
Category	Microcontrollers, Microprocessor, FPGA Modules
Description	- Embedded Module ARM® Cortex®-A5 500MHz 256MB 8MB

Product Attributes

Category	Integrated Circuits (ICs) Embedded Microcontrollers, Microprocessor, FPGA Modules
Operating Temperature	-40°C ~ 85°C (TA)
Connector type	Edge Connector
Size / Dimension	1.610" L x 1.610" W (40.80mm x 40.80mm)
Speed	500MHz
Core Processor	ARM® Cortex®-A5
RAM Size	256MB
Module/Board Type	MPU Core
Flash Size	8MB
Packaging	SMD,40.8x40.8mm
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	5A992C
HtsusCode	8471.50.0150
Weight	4.25g

Introduction

The Microchip SAMA5D27 Wireless System-On-Module 1 (ATSAMA5D27-WLSOM1) is a small single-sided SOM based on the high-performance System-in-Package (SiP) 32-bit Arm Cortex-A5 processor-based MPU SAMA5D27, 2 Gb LPDDR2-SDRAM running up to 500 MHz, and Wi-Fi plus Bluetooth (Wi-Fi/BT) Wireless module. The ATSAMA5D27-WLSOM1 is built on a common set of proven components to reduce time to market by simplifying hardware design and software development. The ATSAMA5D27-WLSOM1 also limits design rules of the main application board, reducing overall PCB complexity and cost. The ATSAMA5D27-WLSOM1 is delivered with a free Linux distribution and bare metal C examples.

Features

System-In-Package (ATSAMA5D27C-LD2G-CU) Including: Arm Cortex-A5 processor-based SAMA5D27 MPU, 2 Gbit LPDDR2-SDRAM
On-Board Power Management Unit (MCP16502AC-E/S8B)
64 Mb Serial Quad I/O Flash Memory (SST26VF064BEUIT-104I/MF) with Embedded EUI-48 and EUI-64 MAC Addresses
IEEE 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) Module (ATWILC3000-MR110UA)
10Base-T/100Base-TX Ethernet PHY (KSZ8081RNAIA)
ATECC608B-TNGTLS Secure Element
MEMS Oscillators for Clock Generation
40.8×40.8 mm Module, Pitch 0.8 mm, Solderable Manually for Prototyping
94 I/Os
Up to 7 Tamper Pins
One USB Device, one USB Host and one HSIC Interface
Shutdown and Reset Control Pins
Independent Power Supplies Available for Camera Sensor, for SD Card and for Backup Depending on Voltage Domains
Operational Specifications: Main operating voltage: 3.0V to 5.5V±5%, Temperature range: -40℃ to 85℃, Integrated oscillators, internal voltage regulators
Multiple interfaces and I/Os for easy application development