مدار مجتمع (آی سی) آی‌سی تعبیه‌شده (پردازنده) میکروکنترلر کاربرد ویژه

Product Attributes

Introduction

EZ-PD™ CCG4 is a dual USB Type-C controller that complies with the latest USB Type-C and PD standards. EZ-PD CCG4 provides a complete dual USB Type-C and USB-Power Delivery port control solution for notebooks, power adapters and docking stations. It can also be used in dual role and downstream facing port applications. EZ-PD CCG4 uses Cypress’s proprietary M0S8 technology with a 32-bit, 48-MHz Arm Cortex-M0 processor with 128 KB flash and integrates two complete Type-C Transceivers including the Type-C termination resistors RP and RD.

Features

• 32-bit MCU Subsystem
• 48-MHz Arm Cortex-M0 CPU
• 128-KB Flash
• 8-KB SRAM
• Up to four integrated timers and counters to meet response times required by the USB-PD protocol
• Four run-time serial communication blocks (SCBs) with re-configurable I2C, SPI, or UART functionality
• Integrated oscillator eliminating the need for external clock
• Integrated USB Power Delivery 3.0 support (only PD 2.0 support for 33-ball CSP part)
• Two integrated USB-PD BMC transceivers
• Integrated UFP(RD) and current sources for DFP(RP) on both Type-C ports
• Integrated dead battery termination for DRP (Power Source/Sink) applications
• Supports two USB Type-C ports
• Integrated VCONN FETs to power EMCA cables
• Integrated fast role swap and extended data messaging (not supported for 33-ball CSP part)
• 2.7-V to 5.5-V operation
• Independent supply voltage pin for GPIO that allows 1.71-V to 5.5-V signaling on the I/Os
• Reset: 1.0 μA, Deep Sleep: 2.5 μA, Sleep: 2.5 mA
• ±8-kV Contact Discharge and ±15-kV Air Gap Discharge based on IEC61000-4-2 level 4C (on 40-pin QFN and 33-ball CSP only)
• Port 0 I2C pins and CC1, CC2 pins are hot-swappable
• Supports extended industrial temperature range -40 °C to +105 °C

Applications

• Notebooks
• Power adapters
• Docking stations