ارسال سریع به سراسر ایران پشتیبانی 24/7
SIGNAL MICRO SIG5532B-ITSP20-RL

مدار مجتمع (آی سی) آی‌سی جمع‌آوری داده مبدل آنالوگ به دیجیتال (ای‌دی‌سی)

SIGNAL MICRO SIG5532B-ITSP20-RL

Manufacturer Signal Micro
Mfr. Part Number SIG5532B-ITSP20-RL
Electland Part Code 704769
Electland Part Number NYE_SIG5532B-ITSP20-RL
Category Analog to Digital Converters (ADC)
Description SPI 4.75V~5.25V TSSOP-20 Analog to Digital Converters (ADC) RoHS

Product Attributes

Category Integrated Circuits (ICs) Data Acquisition Analog to Digital Converters (ADC)
Features Bipolar power supply;Integrated modulator;Built-in digital filter;Power-on reset
Operating Temperature -40℃~+125℃
Voltage - Supply 4.75V~5.25V
interface SPI
Number of Channels 1
Clock Frequency 4.9152MHz;1MHz~5MHz
Clock/Oscillator Built-in;External
ADC architecture Sigma-Delta
Resolution(Bits) 32;1.875Hz
Quiescent Current (Iq) 5.6mA
Voltage Reference Built-in;External
Programmable Gain Support
Packaging TSSOP-20
Weight 0.134g

Introduction

The SIG5532B/34B is a low noise, low drift, and high-resolution 32-bit analog-to-digital converter (ADC) with integrated programmable gain amplifier (PGA) that offers high-accuracy measurement solutions for bridge sensors, thermocouples, and resistance temperature devices (RTD). The device contains a low noise PGA with gains selected from 1, 2, 4, 8, 16, 32, and 64, a delta-sigma (Δ-Σ) modulator, and a programmable SINC3/SINC1 digital filter. A low drift 2.5V reference is integrated on chip for accurate measurement. The output data rate from the device can be configured to 1.875, 3.75, 7.5, 15, 30, 60, 120, 240, 480, 960, 1920, and 3840SPS. This device provides channel sequencer feature to measure the differential inputs automatically. Burnout current sources are provided at the analog inputs for sensor connection diagnosis. Offset and gain calibration registers are provided with calibration command or direct register write to calibrate the ADC errors or overall system errors. SPI-compatible interface is used for device configuration and parity check is provided for data integrity. The on-chip oscillator, an external clock, or an external crystal can be used as the clock source to the device. The device can operate with bipolar ±2.375V to ±2.625V analog power supplies, or with a single 4.75V to 5.25V analog power supply. The SIG5532B is available in 20-lead TSSOP package and the SIG5534B is available in 24-lead TSSOP package. These devices are fully specified over the -40°C to +125°C temperature range.

Features

  • Programmable Gain: 1/2/4/8/16/32/64
  • Selectable Data Rates: 1.875 to 3840SPS
  • RMS Noise: 11nV at 7.5SPS (Gain = 64)
  • 22.8 Noise-Free Bits at 7.5SPS (Gain=1)
  • Offset Drift: 5nV/°C (Gain = 64)
  • Gain Drift: 0.5ppm/°C
  • 2.5V Internal Reference with 5ppm/°C Drift
  • Integral Non-Linearity: 3ppm
  • Internal or External Clock
  • Automatic Channel Sequencer
  • Burnout Current Sources
  • Low-Side Power Switch
  • Parity Check
  • Power Supply AVDD: 4.75V to 5.25V or ±2.5V DVDD: 2.7V to 5.25V
  • Current: 6.0mA
  • Package: 20/24-lead TSSOP

Applications

  • Weigh Scales
  • Strain Gauges
  • Pressure Sensors
  • Temperature Measurement
  • Industrial Process Control

In-Stock Suppliers

NoyanElectronic
658 in stock
Supplier Part Number: NYE_SIG5532B-ITSP20-RL

1 1
QTY USD TOMAN
1+$3.59996,780 تومان
10+$3.12866,280 تومان
30+$2.83785,760 تومان
100+$2.58716,350 تومان

Qty in reel: 4500pcs/reel