ارسال سریع به سراسر ایران پشتیبانی 24/7
SIGNAL MICRO SIG7190-ITSP24-RL

مدار مجتمع (آی سی) آی‌سی جمع‌آوری داده مبدل آنالوگ به دیجیتال (ای‌دی‌سی)

SIGNAL MICRO SIG7190-ITSP24-RL

Manufacturer Signal Micro
Mfr. Part Number SIG7190-ITSP24-RL
Electland Part Code 704577
Electland Part Number NYE_SIG7190-ITSP24-RL
Category Analog to Digital Converters (ADC)
Description SPI 2.7V~5.25V TSSOP-24 Analog to Digital Converters (ADC) RoHS

Product Attributes

Category Integrated Circuits (ICs) Data Acquisition Analog to Digital Converters (ADC)
Features Bipolar input;Bipolar power supply;Multiplexers;Integrated modulator;Built-in digital filter;Auto calibration;Input buffer;Synchronous triggering;Power-on reset
Operating Temperature -40℃~+125℃
Voltage - Supply 2.7V~5.25V
interface SPI
Number of Channels 2
Clock Frequency 4.9152MHz;1MHz~5MHz
Clock/Oscillator Built-in;External
ADC architecture Sigma-Delta
Resolution(Bits) 24;4.8kHz
Voltage Reference Built-in;External
Programmable Gain Support
Packaging TSSOP-24
Weight 0.1615g

Introduction

The SIG7190 is a low noise, low drift, and high-resolution 24-bit analog-to-digital converter (ADC) with integrated programmable gain amplifier (PGA) that offers high-accuracy measurement solutions for bridge sensors, thermocouples, and resistance temperature devices (RTD). The device contains a low noise PGA with gains selected from 1, 2, 4, 8 16, 32, 64, and 128, a delta-sigma (Δ - Σ) modulator, and a programmable digital SINC4/SINC3/fast settling filter. 50Hz/60Hz simultaneous rejection option is also provided. The output data rate from the device can be configured from 4.7SPS up to 4800SPS. This device provides channel sequencer feature to measure two differential inputs or four pseudo differential inputs automatically. Burnout current sources are provided at the analog inputs for sensor connection diagnosis. Offset and gain calibration registers are provided with calibration command or direct register write to calibrate the ADC errors or overall system errors. SPI-compatible interface is used for device configuration and parity check is provided for data integrity. The on-chip oscillator, an external clock, or an external crystal can be used as the clock source to the device. The device can operate with bipolar ±1.35V to ±2.625V analog power supplies, or with a single 2.7V to 5.25V analog power supply. The SIG7190 is available in 24-lead TSSOP package and is fully specified over the -40°C to +125°C temperature range.

Features

  • Programmable Gain: 1/2/4/8/16/32/64/128
  • Data Rates: 4.7SPS to 4.8kSPS
  • RMS Noise: 15nV at 10SPS (Gain = 128)
  • 22.4 noise-free bits at 10SPS (Gain = 1)
  • Offset Drift: 3nV/°C (Gain = 128)
  • Gain Drift: 0.5ppm/°C
  • Integral Non-Linearity: 2ppm
  • Internal or External Clock
  • Simultaneous 50Hz/60Hz Rejection
  • 2 Differential/4 Pseudo Differential Inputs
  • Automatic Channel Sequencer
  • Burnout Current Sources
  • 4 General Purpose Digital Outputs
  • Parity Check
  • Power Supply AVDD: 2.7V to 5.25V or ±2.5V DVDD: 2.7V to 5.25V
  • Current: 2.7mA
  • Package: 24-lead TSSOP

Applications

  • Weigh Scales
  • Strain Gauges
  • Temperature Measurement
  • Industrial Process Control
  • Pressure Sensors

In-Stock Suppliers

NoyanElectronic
1747 in stock
Supplier Part Number: NYE_SIG7190-ITSP24-RL

1 1
QTY USD TOMAN
1+$2.62727,450 تومان
10+$2.27630,280 تومان
30+$2.05569,190 تومان
100+$1.87519,210 تومان

Qty in reel: 3000pcs/reel