اتوماسیون و کنترل صنعتی سنسور صنعتی سنسور جریان سیال صنعتی

Product Attributes

Introduction

This flow meter can read total flow and flow rate, with a measurement range of 5.7 L/min – 75.70 L/min and an accuracy of ±10%. It features tinned wire connections and a 1/2-inch female NPT thread. Maximum pressure: 100 PSI; temperature range: -29°C – 82°C; maximum viscosity: 200 SSU; cable length: 69 cm (27.1 inches); voltage: 4.0V – 24 VDC; expected service life: approximately 10 years. Data output is a square wave; weight: 104.3 g; safe for food, gasoline, diesel, and kerosene. The operating principle uses a paddle wheel to calculate water flow rate via frequency — as water passes through the meter, a magnetic rotor spins at a rate proportional to the flow, generating a frequency. The relationship between water frequency and volume is non-linear; an equation for converting frequency to volume is provided at the end of the documentation. This flow meter is suitable for medium to high flow ranges, from 5.7 L/min (1.5 GPM) to 75.70 L/min (20 GPM).

Features

• Readable total flow and flow rate
• Measurement range 5.7 L/min - 75.70 L/min
• Accuracy ±10%
• Tinned wire connections
• 1/2 inch female NPT
• Maximum pressure 100 PSI
• Temperature range -29°C – 82°C
• Maximum viscosity 200 SSU
• Cable length 69cm
• Voltage 4.0V - 24 VDC
• Expected lifespan ~10 years
• Data output square wave
• Weight 104.3g
• Safe for food, gasoline, diesel, and kerosene