برد توسعه، کیت‌ و پروگرامر برد ارزیابی (Evaluation) بُرد ارزیابی سنسور

Product Attributes

Introduction

The EPCM001C100_EEG host software is designed for data acquisition and result display of the EPCM001C100 vital signs detection module. Connect the EPCM001C100 vital signs detection module to the computer's USB port via an isolated serial port module; the module's USB port is for battery charging only (charging is prohibited during data acquisition). Select the corresponding serial port and baud rate 115200 on the PC, click the circular button on the right to open the serial port, select the electrode pad type, and click the "MEASURE" button to start data acquisition; click the "Stop" button to stop acquisition; click FFT Tool to observe the frequency distribution after FFT transformation. A log file is located in the same folder as the software. The data acquisition protocol header is fixed at 0x24, the checksum is (0x24 + sum of data bytes) & 0xFF, and the delimiter is fixed at 0x0A; the exception notification protocol header is fixed at 0x39, the checksum is (0x39 + sum of data bytes) & 0xFF, and the delimiter is fixed at 0x0A.

Applications

• Vital signs detection module data acquisition
• Vital signs detection result display