برد توسعه، کیت‌ و پروگرامر برد ارزیابی (Evaluation) بُرد ارزیابی میکروکنترلر و دی‌اس‌پی

Product Attributes

Introduction

The feature packed Arduino Nano RP2040 Connect brings the new Raspberry Pi RP2040 microcontroller to the Nano form factor. Make the most of the dual core 32-bit Arm Cortex-M0+ to make Internet of Things projects with Bluetooth and Wi-Fi connectivity thanks to the U-blox Nina W102 module. Dive into real-world projects with the onboard accelerometer, gyroscope, RGB LED and microphone. Develop robust embedded AI solutions with minimal effort using the Arduino Nano RP2040 Connect!

Features

• 133MHz 32bit Dual Core Arm Cortex -M0+
• 264kB on-chip SRAM
• Direct Memory Access (DMA) controller
• Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
• USB 1.1 controller and PHY, with host and device support
• 8 PIO state machines
• Programmable IO (PIO) for extended peripheral support
• 4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
• SWD Debugging
• 2 on-chip PLLs to generate USB and core clock
• 40nm process node
• Multiple low power mode support
• USB 1.1 Host/Device
• Internal Voltage Regulator to supply the core voltage
• Advanced High-performance Bus (AHB)/Advanced Peripheral Bus (APB)
• 240MHz 32bit Dual Core Xtensa LX6
• 520kB on-chip SRAM
• 448 Kbyte ROM for booting and core functions
• 16 Mbit FLASH for code storage including hardware encryption to protect programs and data
• 1 kbit EFUSE (non- erasable memory) for MAC addresses, module configuration, Flash-Encryption, and Chip-ID
• IEEE 802.11b/g/n single-band 2.4 GHz Wi-Fi operation
• Bluetooth 4.2
• Integrated Planar Inverted-F Antenna (PIFA)
• 4x 12-bit ADC
• 3x I2C, SDIO, CAN, QSPI
• AT25SF128A 16MB NOR Flash QSPI data transfer rate up to 532Mbps 100K program/erase cycles
• 3D Accelerometer ±125/±250/±500/±1000/±2000 dps full scale
• Advanced pedometer, step detector and step counter
• Significant Motion Detection, Tilt detection
• Standard interrupts: free-fall, wake-up, 6D/4D orientation, click and double-click
• Programmable finite state machine: accelerometer, gyroscope and external sensors
• Machine Learning Core
• Embedded temperature sensor
• AOP=122.5 dBSPL, 64 dB signal-to-noise ratio, Omnidirectional sensitivity -26 dBFS ±7 dB sensitivity
• Common Anode, Connected to U-blox Nina W102 GPIO
• Cryptographic Co-Processor with Secure Hardware-Based Key Storage
• I2C, SWI
• Hardware Support for Symmetric Algorithms: SHA-256 & HMAC Hash including off-chip context save/restore AES-128: Encrypt/Decrypt, Galois Field Multiply for GCM
• Internal High-Quality NIST SP 800-90A/B/C Random Number Generator (RNG)
• Secure Boot Support: Full ECDSA code signature validation, optional stored digest/signature Optional communication key disablement prior to secure boot Encryption/Authentication for messages to prevent on-board attacks
• 14x Digital Pin, 8x Analog Pin, Micro USB, UART, SPI, I2C Support
• Buck step-down converter
• Safety Information Class A

Applications

• Edge Computing
• Wearable Devices
• Voice assistant