کانکتور و اتصالات کانکتور مستطیلی پین‌هدر نری

TE CONNECTIVITY 5499374-8

Manufacturer	TE Connectivity
Mfr. Part Number	5499374-8
Electland Part Code	542431
Electland Part Number	NYE_5499374-8
Category	Headers, Male Pins
Description	Connector Header Through Hole 34 position 0.100" (2.54mm)

Product Attributes

Category	Connectors, Interconnects Rectangular Connectors Headers, Male Pins
Connector type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	34
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Number of Positions Loaded	All
style	Board to Cable/Wire
Shrouding	Shrouded - 4 Wall
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Latch Lock/Eject Hooks, Short
Contact Length - Mating	0.240" (6.10mm)
Contact Length - Post	0.155" (3.94mm)
Overall Contact Length	0.684" (17.37mm)
Insulation Height	0.549" (13.94mm)
Contact Shape	Square
Contact Finish - Mating	Gold or Gold-Palladium
Contact Finish Thickness - Mating	30.0µin (0.76µm)
Contact Finish - Post	Tin
contact material	Brass
Features	Keying Slot, Mounting Flange
Operating Temperature	-65℃~+105℃
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Current Rating (Amps)	1A per Contact
Voltage Rating	250VAC
Number of Pins	34P
Pitch	2.54mm
Color	Black
Plastic Material	PA
Flame Retardant Rating	UL94V-0
Row Spacing	2.54mm
Contact Plating	Tin
Number of PINs Per Row	17
Pin Structure	2x17P
Packaging	Through Hole
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	1 (Unlimited)
ExportControlClassNumber	EAR99
HtsusCode	8536.69.4040
Weight	5.9815g

Introduction

Coordinate dimensions are applied from the basic position. The 10-pin and 14-pin sizes contain only one slot for a snap-in polarizer (polarization), located as shown. The 10-pin size contains only one slot for dual polarization, located as shown. The recommended PCB thickness is 3.18 [.125]. This is the distance required for the ejector latch in the open position. Material: Housing and latch: glass-filled nylon or polyester, UL94V-0 rated, color per table. Contacts: phosphor bronze or brass. Contacts: In the selectively plated area, flash gold over palladium-nickel plating, minimum thickness 0.76μm [.000030]. Solder tail tin plating minimum thickness 2.54μm [.000100], nickel underplate over entire contact minimum thickness 1.27μm [.000050]. Alternatively, gold plating in the selectively plated area minimum thickness 0.76μm [.000030], solder tail tin plating minimum thickness 2.54μm [.000100], nickel underplate over entire contact minimum thickness 1.27μm [.000050]. Datums -M- and -N- are determined by the customer.