کانکتور و اتصالات کانکتور ماژولار (شبکه/تلفن) تبدیل شبکه (آر‌جی۴۵)

Product Attributes

Introduction

Connector Materials:

• Housing: Black LCP, UL94 V-0
• Insert: Black LCP, UL94 V-0
• Shield: Brass
• Shield Plating: Nickel
• Contacts: Copper alloy
• Contact Plating: Selective gold plating on contact area, min. 0.76μm (30 μin) over min. 1.27μm (50 μin) nickel underplate
• Solder Pin Plating: 3.05μm (120 μin) tin over 1.02μm (40 μin) nickel underplate
• Shield Pin Plating: Nickel

Pin 2 is not electrically connected and may be omitted; see schematic for omitted pins 3 RJ45 ports compliant with FCC Rules and Regulations Part 68 This component is recommended for reflow soldering process, peak soldering temperature up to +260°C for max. 10 seconds Operating Temperature: T = -40°C ~ +85°C Storage Temperature: T = -40°C ~ +85°C

Unless otherwise specified, all dimensional tolerances per table Jack Configuration: 1×1 Label Orientation: Down Packaging: Tape and Reel (T+R) per packaging specification 107-18116

Electrical Schematic:

• Turns Ratio at 100kHz: (P1~P3):(J1~J2) = 1:1±2%
• (P4~P6):(J3~J6) = 1:1±2%
• Primary Inductance: 350μH min. at 100kHz, 0.1V, 8mA DC bias
• DC Resistance: 1.2Ω max.
• Insertion Loss: -1.2dB max. from 1–100MHz
• Return Loss: -16dB min. from 1–30MHz; -12dB min. from 30–60MHz; -10dB min. from 60–80MHz
• Crosstalk: -30dB min. from 1–100MHz
• Common Mode to Common Mode Rejection: -30dB min. from 1–100MHz
• Isolation, PHY Side to Line Side: 1500VAC or 2250VDC