حفاظت مدار محدودکننده‌های ولتاژ گذرا (تی وی اس) دیودهای تی وی اس

Product Attributes

Introduction

The P6SMB series is designed specifcally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features

• Excellent clamping capability
• Low incremental surge resistance
• Typical absolute value of R less than 1 μA when the minimum breakdown voltage (VBR min) > 12 V
• For surface mounted applications to optimize board space
• Low profile package
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4 and 4c
• IEC-61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• EFT protection of data lines in accordance with IEC 61000-4-4
• Built-in strain relief
• Fast response time: typically less than 1.0 ps from 0 V to minimum breakdown voltage (BV min)
• 600 W peak pulse power capability at 10/1000 μs waveform, repetition rate (duty cycles): 0.01 %
• High temperature to reflow soldering guaranteed: 260 ℃/40 sec
• Voltage at temperature T (V @ T) = Voltage at 25 ℃ (V @ 25℃) x (1 + temperature coefficient (αT) x (T - 25)) (αT: Temperature Coefficient, typical value is 0.1 %)
• Plastic package is flammability rated V-0 per Underwriters Laboratories
• Meet MSL level 1, per J-STD-020C, LF maximum peak of 260 ℃
• Matte tin lead–free plated
• Halogen free and RoHS compliant
• Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin (Sn) (IPC/JEDEC J-STD609A.01)

Applications

• TVS devices are ideal for the protection of I/O Interfaces, V_CC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.