حفاظت مدار محدودکننده‌های ولتاژ گذرا (تی وی اس) دیودهای تی وی اس

Product Attributes

Introduction

The SMA6J series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Features

• Small DO-214AC SMT footprint for minimal board space requirement
• Typical failure mode is a short circuit condition for current events exceeding component rating
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Typical IR < 1μA when VBR min > 12V
• High temperature reflow soldering guaranteed: 260°C/30sec
• UL Recognized compound meeting flammability rating V-0
• Meet MSL level1, per J-STD-020, lead-frame maximun peak of 260°C
• Matte tin lead–free plated
• Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01)

Applications

• TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.