حفاظت مدار محدودکننده‌های ولتاژ گذرا (تی وی اس) تجهیزات حفاظت در برابر اضافه‌ولتاژ گذرا (اس پی دی)

R-K ELECTRONICS, INC. TFDR-100.5-30

Manufacturer	R-K Electronics, Inc.
Mfr. Part Number	TFDR-100.5-30
Electland Part Code	387497
Electland Part Number	NYE_TFDR-100.5-30
Category	Surge Protection Devices (SPDs)
Description	Surge Protection Device (SPD) 240VAC MCOV 1 Pole
Datasheet	Download

Product Attributes

Category	Circuit Protection Transient Voltage Suppressors (TVS) Surge Protection Devices (SPDs)
form	Module Only
Number of poles	1
Voltage - Continuous Operating (Max) (MCOV)	240VAC
Operating Temperature	-40°C ~ 85°C
Mounting Type	DIN Rail
Approval Agency	cURus, UL
Packaging	Box
Tariff Active	False
ReachStatus	REACH not applicable
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	1 (Unlimited)
ExportControlClassNumber	EAR99
HtsusCode	8536.49.0000
Weight	0.5g

Introduction

Transient Voltage Filters TVFs are applied to circuits where transient electrical voltage spikes can cause a malfunction or damage in solid state controls or control systems (PLCs, CNCs, NCs, Solid State Counters, etc.). The TFD is typically applied in parallel with three phase inductive loads (motors) to absorb the transients generated when the load is disconnected from the line. It also absorbs electrical noise while the load is operating. The Bleeding Resistor allows the voltage that builds up on the capacitor in the TFD to bleed off after voltage is removed. The Bleeding Resistor is typically used in applications where the control with the TFD may be operated (tested) without the load (motor) connected.

Features

Din Rail or Surface Mounting
240 Volt UL Type Approval
Delta Configuration
Three Phase (3O) Applications
Bleeding Resistor Option
Terminal Block or Leads

Applications

circuits where transient electrical voltage spikes can cause a malfunction or damage in solid state controls or control systems (PLCs, CNCs, NCs, Solid State Counters, etc.)
in parallel with three phase inductive loads (motors)
applications where the control with the TFD may be operated (tested) without the load (motor) connected