حفاظت مدار محدودکننده‌های ولتاژ گذرا (تی وی اس) فناوری ترکیبی

Product Attributes

Introduction

The TISP9110LDM is a programmable overvoltage protection device designed to protect modern dual polarity supply rail ringing SLICs (Subscriber Line Interface Circuits) against overvoltages on the telephone line. Overvoltages can be caused by lightning, a.c. power contact and induction. Four separate protection structures are used; two positive and two negative to provide optimum protection during Metallic (Differential) and Longitudinal (Common Mode) protection conditions in both polarities. Dynamic protection performance is specified under typical international surge waveforms from Telcordia GR - 1089 - CORE, ITU - TK.44 and YD/T950. The TISP9110LDM is programmed by connecting the G1 and G2 gate terminals to the negative (-V(BAT)) and positive (+V(BAT)) SLIC Battery supplies respectively. This creates a protector operating at typically +1.4 V or above +V(BAT) and -1.4 V or below -V(BAT) under a.c. power induction and power contact conditions. The protector gate circuitry incorporates 4 separate buffer transistors designed to provide independent control for each protection element. The gate buffer transistors minimize supply regulation issues by reducing the gate current drawn to around 5 mA, while the high voltage base emitter structures eliminate the need for expensive reverse bias protection gate diodes. The TISP9110LDM is rated for common surges contained in regulatory requirements such as ITU - T K.20, K.45, Telcordia GR - 1089 - CORE, YD/T 950. By the use of appropriate overcurrent protection devices such as the Bourns Multifuse and Telefuse devices, circuits can be designed to comply with modern telecom standards.

Features

• Wide - 110V to +110 V Programming Range
• Low 5 mA max. Gate Triggering Current
• Dynamic Protection Performance Specified for International Surge Waveshapes
• UL Recognized Component

Applications

• Wireless Local Loop
• Access Equipment
• Regenerated POTS
• VOIP Applications