سنسور و مبدل سنسور فراصوت (التراسونیک)

Product Attributes

Introduction

This is an ultrasonic distance sensor module featuring an open dual-probe design. It uses I2C communication with a Gravity PH2.0 - 4P vertical SMT connector as the standard interface. The module is compatible with 3.3V or 5V logic level controllers such as Arduino and Raspberry Pi. The ultrasonic sensor has built-in temperature compensation and can measure distances effectively from 2cm to 500cm. It offers a resolution of 1cm and an accuracy of ±1%. Three measurement ranges are available for selection in the program: 150cm, 300cm, and 500cm. Note that setting a shorter range results in a reduced measurement cycle and lower sensitivity, so you may need to configure this based on your actual application.

Features

• Supply voltage: 3.3V ~ 5.5V DC
• Operating current: 20mA
• Operating temperature range: -10°C ~ +70°C
• Measurement range: 2cm ~ 500cm (configurable)
• Resolution: 1cm
• Accuracy: 1%
• Beam angle: 60°
• Frequency: 50Hz max
• Dimensions: 47mm × 22mm / 1.85" × 0.87"