سنسور و مبدل سنسور فراصوت (التراسونیک)

Product Attributes

Features

• IntellIDAPT self-adaptive technology, no manual adjustment required
• Fully digital dual-technology passive infrared (PIR) and ultrasonic (US) sensors
• Non-volatile memory for sensor settings
• 1600 sq ft coverage area
• Optional relay and photocell control
• Low-voltage device: 24VDC
• Housing: rugged, high-impact, injection-molded KJB ABS Cycolac plastic (UL - 945VA)
• Color-coded leads, 6 inches (152.4mm) long
• Weight: 5.0 oz (142g)
• Gray/white
• Red indicates infrared motion
• Green indicates ultrasonic detection
• Dual-element pyrometer and 12-element cylindrical rugged lens
• Mounting base included
• Recommended maximum mounting height: 12 ft (3.66m)
• Operating frequency: 32kHz
• 24VDC, 33mA (using UVPP and MP series power packs, not included)
• 24VDC active-high logic control signal with short-circuit protection and optional dry contact
• Auto-reset from test mode
• Self-adjusting timer
• Self-adjusting PIR and acoustic thresholds
• Auto-correction of false-ON/false-OFF
• Coverage area: 1600 sq ft (365.76 m²)
• Auto mode: 8–30 minutes (automatically adjusted based on occupancy)
• Test mode: 8 seconds (for verification during installation)
• Relay and photocell included
• Relay: NO + NC contacts; SPDT; rated 500mA at 24VDC; 3-wire isolated relay
• Photocell: adjustable daylight range from 0 to 100 foot-candles (0–1000 lux)
• Factory set to 3000 lux (photocell disabled)
• Indoor use only
• Operating temperature: 32°F to 104°F (0°C to 40°C)
• Relative humidity (non-condensing): 0% to 95%
• UL and cUL listed