سنسور و مبدل سنسور تخصصی

Product Attributes

Introduction

An anemometer is a device used to measure wind speed and is a common meteorological station instrument. This well-built anemometer is designed for outdoor use and allows easy measurement of wind speed. To use, connect the black wire to power and signal ground, connect the brown wire to 7 - 24VDC (we successfully operated it at 9V), and measure the analog voltage on the blue wire. The voltage ranges from 0.4V (wind speed of 0m/s) to 2.0V (wind speed of 32.4m/s). It's that simple! The sensor is rugged and easy to install. The cable can be easily disconnected with just a few twists and features a waterproof connector.

Features

• Height (base to center): 105mm / 4.1 inches
• Distance from center to cup: 102mm / 4 inches
• Arm length: 70mm / 2.8 inches
• Weight: 111.8g
• Cable length: 99cm / 39 inches
• Plug length: 30mm / 1.2 inches
• Diameter (thickness): 4.8mm / 0.2 inches
• Output: 0.4V to 2V
• Measurement range: 0.5m/s to 50m/s
• Start-up wind speed: 0.2m/s
• Resolution: 0.1m/s
• Accuracy: 1m/s worst case
• Maximum wind speed: 70m/s
• Connector details: Pin 1 - Power (brown wire), Pin 2 - Ground (black wire), Pin 3 - Signal (blue wire), Pin 4 not connected