سنسور و مبدل سنسور حضور آماده

Product Attributes

Features

• Wireless programming via NX Lighting Control mobile app, supporting on/off and 0-10V dimming control
• Single/dual motion sensor timer modes
• Multiple daylight harvesting modes for indoor and outdoor applications
• Interchangeable high/low area detection lens options
• Available in low voltage and line voltage models
• Daylight sensor for daylight harvesting applications
• Available in low temperature/waterproof/indoor-outdoor universal versions
• Sensor module and lens assembly constructed of high-impact molded plastic
• Weight: 7 oz (198.45 g)
• Available in white, black, and gray finishes
• Dimensions: 4.0" × 1.5" H (101.6mm × 38.1mm H)
• Line voltage sensor: 120-480VAC, 60Hz
• Low voltage sensor: 24VDC "Class 2" (requires UVPP or MP series power supply — not included)
• Capable of sinking up to 30mA
• 24VDC high-level logic control signal
• Bluetooth radio: V5.0
• Suitable for indoor/outdoor use
• Operating temperature: 32°F to 149°F (0°C to 65°C)
• Low temperature/waterproof/indoor-outdoor universal version operating temperature: -40°F to 149°F (-40°C to 65°C)
• Wireless programming of sensor settings via NX Lighting Control mobile app, maximum programming range 45 ft
• Easy-to-use slider controls for sensor configuration
• Motion sensor and photosensor test modes
• Configurable LED motion indicator
• Single/dual motion sensor timer modes
• Single timer mode: timer (1 sec – 20 min), light level (0–100%), relay state (on/off)
• Dual timer mode: timer 1 (1 sec – 20 min), light level (0–100%), relay state (on/off) / timer 2 (0 min – 4 hrs)
• Multiple daylight harvesting modes: full-range auto-dimming (closed-loop operation), conventional dimming (open-loop operation), dusk-to-dawn (on/off operation), disabled (default)
• Device cloning: sensor settings can be saved to a device profile and cloned to other sensors
• Patented Intelliscopete™ technology displays real-time occupancy data
• Password protection against accidental changes
• Bluetooth radio can be disabled via app after programming (to re-enable, press and hold the reset pin on the sensor for 5 seconds)
• Sensor settings can be restored to factory defaults via app or by pressing and holding the sensor reset pin for more than 10 seconds
• Supports over-the-air (OTA) firmware updates
• Dual-element pyroelectric detector with spherical Fresnel lens design for reliable pedestrian detection (when used with programmed-start ballasts, a 1–2 second delay from detection to lamp on may occur)
• Daylight sensor range: 1 to 50 fc or 5 to 500 fc
• End-mount sensor: upward or downward daylight sensor selectable via NX Lighting Control mobile app
• Surface-mount sensor: downward daylight sensor only
• Lens options (lenses sold separately — not included with sensor module): low-mount/high-mount, indoor/outdoor
• Coverage patterns: 360°, 180°, corridor, half-corridor
• Listed to UL STD 508 and UL STD 244A; LWO version rated IP65