سنسور و مبدل سنسور و ترانسمیتر فشار

HONEYWELL ABPMANN060KGSA3

Manufacturer	Honeywell
Mfr. Part Number	ABPMANN060KGSA3
Electland Part Code	305407
Electland Part Number	NYE_ABPMANN060KGSA3
Category	Pressure Sensors, Transducers
Description	Pressure Sensor 8.7PSI (60kPa) Vented Gauge Male - 0.08" (2.13mm) Tube 12 b 6-SMD Module
Datasheet	Download

Product Attributes

Category	Sensors, Transducers Pressure Sensors, Transducers
Applications	Medical Ventilation
Pressure Type	Vented Gauge
Operating Pressure	8.7PSI (60kPa)
Output Type	SPI
output	12 b
accuracy	±0.25%
Voltage - Supply	3V~3.6V
Port Size	Male - 0.08" (2.13mm) Tube
Port Style	Barbed
Features	Integrated signal amplifier;On-chip temperature compensation;Standby mode;Integrated ADC and digital interface;On-chip self-diagnosis;On-chip temperature output
Termination Style	J Lead
Maximum Pressure	29.01PSI (200kPa)
Operating Temperature	-40℃~+85℃
Mounting Type	Surface Mount
Package / Case	6-SMD Module
Supplier Device Package	6-SMD
Pressure range	60Kpa
Packaging	SMD-6P
ReachStatus	REACH Unknown
RohsStatus	RoHS Compliant
MoistureSensitivityLevel	2 (1 Year)
ExportControlClassNumber	EAR99
HtsusCode	8542.39.0090
Weight	0.5g

Introduction

The ABP series are piezoresistive silicon pressure sensors that provide ratiometric analog or digital output for reading pressure within a specified full-scale pressure span and temperature range. They are calibrated and temperature-compensated via an onboard ASIC to correct for sensor offset, sensitivity, temperature effects, and accuracy errors (including non-linearity, repeatability, and hysteresis). The pressure-calibrated output update rate is approximately 1 kHz for analog and 2 kHz for digital. All products are designed and manufactured in accordance with ISO 9001.

Dry gas option: The inlet port is limited to non-corrosive, non-ionic media (e.g., dry air, gases) and must not be exposed to condensation. Gas is limited to media compatible with high-temperature polyamide, silicone, alumina ceramic, silicon, gold, and glass.
Liquid media option: Includes an additional silicone-based gel coating to protect the electronics beneath port P1, making it suitable for use with non-corrosive liquids (e.g., water and brine) and applications where condensation may occur. Since port P2 is designed for non-corrosive liquids, this option is typically intended for wet-wet differential pressure sensing.

Features

Gauge and differential pressure measurement
Total error band: ±1.5% FSS
Liquid media option: wet/wet operation on dual-port devices
Long-term stability: ±0.25% FSS
Accuracy: ±0.25% FSS BFSL
Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi
Compact size from 8 mm × 7 mm
High burst pressure
Calibrated over 0°C to 50°C [32°F to 122°F]
Single-supply operation: 3.3 Vdc or 5.0 Vdc
Output: ratiometric analog or I²C/SPI-compatible 12-bit digital
Power consumption: 2 μA typical with sleep mode option
Compliant with IPC/JEDEC J-STD-020D.1 moisture sensitivity level 1
REACH and RoHS compliant
Options: internal diagnostics, liquid media, sleep mode, temperature output
Sensor materials tested and certified to food safety standards: NSF-169, BPA-free, LFGB

Applications

Medical: CPAP, blood analysis, blood pressure monitoring, breast pumps, drug dosage, hospital beds, massage machines, oxygen concentrators, patient monitoring, sleep apnea devices, urinalysis, ventilators/portable ventilators, wound treatment
Industrial: air brakes, HVAC/transmitters, life sciences, material handling, pneumatic control and regulation, process gas monitoring, valve positioning/positioners
Commercial: air mattresses, coffee machines, washing machines