سنسور و مبدل سنسور و ترانسمیتر فشار

Product Attributes

Introduction

The ABP Series are piezoresistive silicon pressure sensors that provide ratiometric analog or digital output for reading pressure within a specified full-scale pressure span and temperature range. They are calibrated and temperature-compensated via an onboard ASIC to eliminate sensor offset, sensitivity, temperature effects, and accuracy errors (including non-linearity, repeatability, and hysteresis). The pressure-calibrated output value update rate is approximately 1 kHz for analog and 2 kHz for digital. All products are designed and manufactured in accordance with ISO 9001. Dry gas option: The input port is limited to non-corrosive, non-ionic media (e.g., dry air, gas) and should not be exposed to condensation. Gas is limited to media compatible with high-temperature polyamide, silicone, alumina ceramic, silicon, gold, and glass. Liquid media option: Includes an additional silicone gel coating to protect the electronics beneath port P1, enabling use with non-corrosive liquids (e.g., water and brine) and applications where condensation may occur. Since port P2 is designed for non-corrosive liquids, this option is typically suited for wet-wet differential pressure sensing.

Features

• Gauge and differential pressure measurement
• Total error band: ±1.5% FSS
• Liquid media option: enables wet/wet operation for dual-port devices
• Long-term stability: ±0.25% FSS
• Accuracy: ±0.25% FSS BFSL
• Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi
• Compact size down to 8 mm × 7 mm
• High burst pressure
• Calibrated over 0°C to 50°C [32°F to 122°F] temperature range
• Single supply operation: 3.3 Vdc or 5.0 Vdc
• Output: ratiometric analog or I²C/SPI-compatible 12-bit digital
• Power consumption: 2 μA typical with sleep mode option
• Compliant with IPC/JEDEC J-STD-020D.1 moisture sensitivity level 1
• REACH and RoHS compliant
• Options: internal diagnostic function, liquid media, sleep mode, temperature output
• Sensor materials tested and certified to food safety standards: NSF-169, BPA Free, LFGB

Applications

• Medical: CPAP, blood analysis, blood pressure monitoring, breast pumps, drug dosage, hospital beds, massage machines, oxygen concentrators, patient monitoring, sleep apnea devices, urine analyzers, ventilators/portable ventilators, wound therapy
• Industrial: air brakes, HVAC/transmitters, life sciences, material handling, pneumatic control & regulation, process gas monitoring, valve positioning/positioners
• Commercial: air mattresses, coffee machines, washing machines