سنسور و مبدل سنسور و ترانسمیتر فشار

HONEYWELL ABPDANN005PG2A3

Manufacturer	Honeywell
Mfr. Part Number	ABPDANN005PG2A3
Electland Part Code	302438
Electland Part Number	NYE_ABPDANN005PG2A3
Category	Pressure Sensors, Transducers
Description	Pressure Sensor 5PSI (34.47kPa) Vented Gauge Male - 0.08" (1.93mm) Tube 12 b 6-DIP Module
Datasheet	Download

Product Attributes

Category	Sensors, Transducers Pressure Sensors, Transducers
Applications	Medical Ventilation
Pressure Type	Vented Gauge
Operating Pressure	5PSI (34.47kPa)
Output Type	I2C
output	12 b
accuracy	±0.25%
Voltage - Supply	3.3V
Port Size	Male - 0.08" (1.93mm) Tube
Port Style	Barbed
Features	Integrated signal amplifier;On-chip temperature compensation;Integrated ADC and digital interface;Standby mode;On-chip self-diagnosis;On-chip temperature output
Termination Style	PC Pin
Maximum Pressure	90PSI (620.53kPa)
Operating Temperature	-40℃~+85℃
Mounting Type	Through Hole
Package / Case	6-DIP Module
Supplier Device Package	6-DIP
interface	I2C
standby current	1uA
Module	Yes
Pressure range	34.47Kpa
Response time	460us
Packaging	DIP-6
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	RoHS Compliant
MoistureSensitivityLevel	2 (1 Year)
ExportControlClassNumber	EAR99
HtsusCode	8542.39.0090
Weight	0.5g

Introduction

The ABP series are piezoresistive silicon pressure sensors that provide ratiometric analog or digital output for reading pressure within a specified full-scale pressure span and temperature range. They use an onboard ASIC to calibrate and temperature-compensate sensor offset, sensitivity, temperature effects, and accuracy errors. The calibrated pressure output is updated at approximately 1kHz for analog and 2kHz for digital. All products are designed and manufactured in accordance with ISO 9001 standards.

Dry gas option: Input ports are limited to non-corrosive, non-ionic media and must not be exposed to condensation. Media must be compatible with high-temperature polyamide, silicone, alumina ceramic, silicon, gold, and glass.
Liquid media option: Includes an additional silicone-based gel coating to protect the electronics beneath port P1, enabling use with non-corrosive liquids and applications where condensation may occur. Since port P2 is designed for non-corrosive liquids, this option is typically suitable for wet-wet differential pressure sensing.

Features

Gauge and differential pressure measurement
Total error band: ±1.5% FSS
Liquid media option: enables wet/wet operation for dual-port devices
Long-term stability: ±0.25% FSS
Accuracy: ±0.25% FSS BFSL
Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi
Compact size: as small as 8 mm × 7 mm
High burst pressure
Calibrated over 0°C to 50°C temperature range
Single supply operation: 3.3 Vdc or 5.0 Vdc
Output: ratiometric analog or I2C/SPI-compatible 12-bit digital output
Power consumption: typical 2 μA with sleep mode option
Compliant with IPC/JEDEC J-STD-020E moisture sensitivity level 2
REACH and RoHS compliant
Options: internal diagnostics, liquid media, sleep mode, temperature output
Sensor materials tested and certified to food safety standards: NSF-169, BPA Free, LFGB

Applications

Medical: CPAP, blood analysis, blood pressure monitoring, breast pumps, drug dosing, hospital beds, massage machines, oxygen concentrators, patient monitoring, sleep apnea devices, urinalysis, ventilators/portable ventilators, wound therapy
Industrial: air brakes, HVAC/transmitters, life sciences, material handling, pneumatic control & regulation, process gas monitoring, valve positioning/positioners
Commercial: air mattresses, coffee machines, washing machines