سنسور و مبدل سنسور رطوبت

Product Attributes

Introduction

DFN type package Relative Humidity and Temperature Digital Output, 1℃ interface Fully calibrated Lead free sensor, reflow solderable Low power consumption Fast response time. The HTU21D(F) is a new digital humidity sensor with temperature output. It is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 × 3 × 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, 1℃ format.

HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro - controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.

Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip - which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T).

Optional PTFE filter/membrane (F) protects HTU21D digital humidity sensors against dust and water immersion, as well as against contamination by particles. PTFE filter/membranes preserve a high response time. The white PTFE filter/membrane is directly stuck on the sensor housing. This membrane is allowing an IP67 compliant protection.

Features

• Full interchangeability with no calibration required in standard conditions
• Instantaneous desaturation after long periods in saturation phase
• Compatible with automatized assembly processes, including Po free and reflow processes
• Individual marking for compliance to stringent traceability requirements

Applications

• Home Appliance
• Medical
• Printers
• Humidifier