سنسور و مبدل سنسور سطح و فلوتر

Product Attributes

Introduction

The S286 is an active device designed to generate an alarm signal when liquid falls below or rises above a preset level. A time delay can be configured to eliminate false triggers caused by liquid turbulence. The switch incorporates a factory-programmable microprocessor, providing either a current-sinking-to-ground or voltage-sourcing output. For optimal accuracy, the S286 should ideally be mounted horizontally at the point where an alarm or control signal is required.

Features

• Sink (open collector) output type
• Alarm delay: 10 seconds (factory setting)
• Body material: brass
• Probe material: PTFE
• Terminal material: tin-plated brass
• Connector material: 30% glass-filled nylon
• Thread seal: Vibra-Seal 516
• Protection rating: IP67
• Maximum pressure: 5 bar
• Drop resistant: 1 m onto concrete surface
• Vibration: 15.3 Grms
• Operating temperature range: -40°C ~ +125°C
• EMC compliant: ISO13766:2006
• Supply voltage: 9-36 VDC
• Supply current: 7 mA + source output current