سنسور و مبدل سنسور سطح و فلوتر

Product Attributes

Introduction

The S286 is an active device designed to generate an alarm signal when liquid falls below or rises above a preset level. A configurable delay can be set to eliminate false triggers caused by liquid turbulence. The switch incorporates a factory-programmable microprocessor, providing either a current-sinking-to-ground or supply voltage output. For optimal accuracy, the S286 should ideally be mounted horizontally at the point where an alarm or control signal is required.

Features

• Output: Current sink in air
• Alarm delay: 10 seconds (factory setting)
• Power-on state: In liquid
• Switch sensing liquid level: Falling
• Body material: Brass
• Probe material: PTFE
• Terminal material: Tin-plated brass
• Connector material: 30% glass-filled nylon
• Thread sealant material: Vibra-Seal 516
• Protection rating: IP67
• Pressure: 5 bar max
• Drop: 1 meter onto concrete
• Vibration: 15.3 Grms
• Temperature: -40 to +125℃
• EMC: Compliant with ISO13766:2006
• Supply voltage: 9–36 VDC
• Supply current: 7 mA + source output