سنسور و مبدل سنسور جریان

Product Attributes

Introduction

TMCS1101-Q1 is a galvanically isolated Hall-effect current sensor capable of measuring DC or AC current with high accuracy, excellent linearity, and temperature stability. A low-drift, temperature-compensated signal chain achieves <1.5% full-scale error over the device's temperature range. Input current flows through an internal 1.8mΩ conductor, whose generated magnetic field is measured by an integrated Hall-effect sensor. This architecture eliminates the need for an external concentrator and simplifies design. The low conductor resistance minimizes power loss and heat dissipation. Inherent galvanic isolation provides 600V lifetime working voltage and 3kV_RMS basic isolation between the current path and circuitry. An integrated electrical shield delivers excellent common-mode rejection and transient immunity. The output voltage is proportional to the input current with four sensitivity options. Fixed sensitivity allows the TMCS1101-Q1 to operate from a single 3V to 5.5V supply, eliminating ratiometric error and improving power supply noise rejection. Current polarity is positive when current flows into the positive input pin. Both unidirectional and bidirectional sensing variants are available. The TMCS1101-Q1 draws a maximum supply current of 6mA, with all sensitivity options rated for an operating temperature range of -40°C to +125°C.

Features

• AEC-Q100 qualified for automotive applications
• Temperature Grade 1: -40℃ to 125℃
• Functional Safety enabled
• Documentation available to aid functional safety system design
• Total error: ±0.51% typical, ±1.15% maximum
• Sensitivity error from -40℃ to 85℃: ±0.5%
• Offset voltage error: 9mA
• Temperature drift: 0.04mA/℃
• Linearity error: 0.05%
• Lifetime and environmental drift: <±0.5%
• Signal bandwidth: 80kHz
• Safety-related certification UL 1577 component recognition program
• IEC/CB 62368-1

Applications

• Motor and load control
• Inverter and H-bridge current measurement
• Power factor correction
• Overcurrent protection
• DC and AC power monitoring