آر اف (فرکانس رادیویی) و بی‌سیم آی‌سی آر‌اف‌آی‌دی و کنترل دسترسی

Product Attributes

Introduction

The FSV9563’s internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/MIFARE cards and transponders without additional active circuitry. The digital module manages the complete ISO/IEC 14443A framing and error detection functionality (parity and CRC).

The FSV9563 supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE PLUS and MIFARE DESFire products. The FSV9563 supports MIFARE higher transfer speeds of up to 848 kbit/s in both directions.

The FSV9563 supports layer 2 and 3 of the ISO/IEC 14443B reader/writer communication scheme except anticollision. The anticollision needs to be implemented in the firmware of the host controller as well as in the upper layers.

The FSV9563 is able to demodulate and decode FeliCa coded signals. The FeliCa receiver part provides the demodulation and decoding circuitry for FeliCa coded signals. The FSV9563 handles the FeliCa framing and error detection such as CRC. The FSV9563 supports FeliCa higher transfer speeds of up to 424 kbit/s in both directions.

The FSV9563 is supporting the P2P passive initiator mode in accordance with ISO/IEC 18092.

The FSV9563 supports the vicinity protocol according to ISO/IEC15693, EPC UID and ISO/IEC 18000 - 3 mode 3/ EPC Class - 1 HF.

Features

• High RF output power frontend IC for transfer speed up to 848 kbit/s
• Supports ISO/IEC 14443 A/MIFARE, ISO/IEC 14443 B and FeliCa
• P2P passive initiator mode in accordance with ISO/IEC 18092
• Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000 - 3 mode 3/ EPC Class - 1 HF
• Supports MIFARE Classic encryption in read/write mode
• Low - Power Card Detection
• Compliance to “EMV contactless protocol specification” on RF level can be achieved
• Antenna connection with minimum number of external components
• Supported host interfaces:
  • SPI up to 10 Mbit/s
  • I2C - bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus
  • RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply
  • Separate I²C - bus interface for connection of a secure access module (SAM)
• FIFO buffer with size of 512 byte for highest transaction performance
• Flexible and efficient power saving modes including hard power down, standby and low - power card detection
• Cost saving by integrated PLL to derive system CPU clock from 27.12 MHz RF quartz crystal
• 3 V to 5.5 V power supply
• Up to 8 free programmable input/output pins
• Typical operating distance in read/write mode for communication to a ISO/IEC 14443A/MIFARE Card up to 12 cm, depending on the antenna size and tuning