آر اف (فرکانس رادیویی) و بی‌سیم ماژول کارت‌خوان آر‌اف‌آی‌دی

Product Attributes

Introduction

The OEM-MIFARE-ICODE Reader Board is a complete Read/Write system for ISO14443A Mifare 1k, 4k, Ultralight and ISO15693 ICODE / TAG-IT cards and tags. It has an integrated PCB track antenna, LEDs, TTL serial and I/O interface and is available in two versions; with RS232 connector or USB (RS232 interface version requires 5 volt supply, USB version uses USB bus for power supply). The OEM boards are based on the proven RWD-MIFARE-ICODE module design with components laid out inside a PCB track antenna and they function in exactly the same way as the module with an antenna fitted. The design incorporates power supply filtering to ensure optimum performance, antenna-trimming capacitor to adjust tuning for different environments and LEDs for visual indication of card acceptance. The J2 connector also allows the OEM-MIFAREICODE board to be reprogrammed with custom firmware. OEM-MIFARE-ICODE-RS232 Complete “plug-and-go” RFID Read / Write system based on proven design. Integrated PCB antenna, LEDS, RS232 or USB interface. Supports Mifare 1k, 4k, Ultralight and ICODE / Tag-it (including contactless read/write to Mifare ProX, SmartMX / JCOP cards). Average current consumption down to 100μμ (micro Amps) even when fully active. Auxiliary output options for automatic data output as serial or Weigand protocol. “Reference Design Pack” available for ultra low-cost higher volume applications.

Features

• Complete “plug-and-go” RFID Read / Write system based on proven design
• Integrated PCB antenna, LEDS, RS232 or USB interface
• Supports Mifare 1k, 4k, Ultralight and ICODE / Tag-it (including contactless read/write to Mifare ProX, SmartMX / JCOP cards)
• Average current consumption down to 100μμ (micro Amps) even when fully active
• Auxiliary output options for automatic data output as serial or Weigand protocol
• “Reference Design Pack” available for ultra low-cost higher volume applications