آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

MICROCHIP RN52-I/RM116

Manufacturer	MICROCHIP
Mfr. Part Number	RN52-I/RM116
Electland Part Code	290988
Electland Part Number	NYE_RN52-I/RM116
Category	RF Transceiver Modules and Modems
Description	Bluetooth Bluetooth v3.0, Class 2 Transceiver Module 2.4GHz Integrated, Trace Surface Mount
Datasheet	Download

Product Attributes

Category	RF and Wireless RF Transceiver Modules and Modems
RF Family/Standard	Bluetooth
Protocol	Bluetooth v3.0, Class 2
Modulation	DPSK, DQPSK, GFSK
Frequency	2.4GHz
Data Rate	3Mbps
Power - Output	4dBm
Sensitivity	-85dBm
Serial Interfaces	AIO, I2S, SPI, UART, USB
Antenna Type	Integrated, Trace
Memory Size	16MB Flash
Voltage - Supply	3V ~ 3.6V
Current - Receiving	30mA
Current - Transmitting	30mA
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C
Package / Case	50-SMD Module
interface	AIO;I2S;SPI;UART;USB
Features	OTA (Over-The-Air) upgrade
Output Power(Max)	4dBm
Packaging	SMD-50P
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	5A992C
HtsusCode	8517.62.0090
Weight	0.5g

Introduction

Microchip’s RN52 Bluetooth audio module provides a highly integrated solution for delivering high-quality stereo audio in a small form factor. It combines a class 2 Bluetooth radio with an embedded DSP processor. The module is programmed and controlled with a simple ASCII command set. The RN52 module complies with Bluetooth specification version 3.0. It integrates an RF radio and a baseband controller making it a complete Bluetooth subsystem. The RN52 supports a variety of profiles including A2DP, AVRCP, HSP/HFP, SPP and iAP. It provides a UART interface, several user programmable I/O pins, stereo speaker outputs, microphone inputs, digital audio interface and a USB port. Standard RN52 and its variants support A2DP, AVRCP, HFP, SPP and iAP in the capacity of Bluetooth Slave role. RN52SRC supports A2DP, AVRCP, HFP in the capacity of Bluetooth Master role. RN52 supports wireless iAP profile advertising which is discoverable by iOS devices. An external host microcontroller is required to implement the iAP protocol and communicate with the authentication coprocessor while using the RN52 as a data pipe only to transfer the iAP protocol data over Bluetooth back and forth with the Apple device. A P|C(B) microcontroller can be used to implement the iAP protocol using the Microchip MFi Library.

Features

Fully qualified Bluetooth version 3.0 module
Fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1
Embedded Bluetooth profiles: A2DP, AVRCP, HFP/HSP and SPP
Audio decoders: SBC, AAC, aptX
Enhanced hands free voice capability narrowband and wideband codecs with cVc DSP
Software configurable through commands over UART console interface
Stereo analog differential audio output and input for highest quality audio
External Audio CODECs Supported via S/PDIF and I2S Interface
Integrated Amplifier for Driving 16Ω Speakers
Dedicated GPIO pins enable MCUs to access control and status functions efficiently
SPP data connection interface over UART
Supports wireless iAP profile advertising which is discoverable by iOS devices (iAP protocol implementation on an external host microcontroller required)
Certifications: FCC, IC, CE, Bluetooth SIG
Postage Stamp sized form factor: 13.5×26.0×2.7 mm
Castellated SMT pads for easy and reliable PCB mounting
Environmentally Friendly, RoHS Compliant
Bluetooth SIG QDID 58578