آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The Cypress CYBLE-222014-01 is a fully certified and qualified module supporting Bluetooth Low Energy 5.1 wireless communication. The CYBLE-222014-01 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PSoC 4 Bluetooth LE.

The CYBLE-222014-01 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-222014-01 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm package.

The CYBLE-222014-01 is drop-in compatible with the CYBLE-022001-00 (128KB BT 5.1) and CYBLE-222005-00 (256KB BT 4.1).

Features

• Module size: 10.0 mm × 10.0 mm × 1.80 mm (with shield)
• 256-KB flash memory, 32-KB SRAM memory
• Up to 16 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
• Bluetooth 5.1 qualified single-mode module
• Certified to FCC, CE MIC, KC, and ISED regulations
• Eight-channel direct memory access (DMA) controller
• 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
• Industrial temperature range: -40 °C to +85 °C
• Watchdog timer with dedicated internal low-speed oscillator (ILO)
• Two-pin SWD for programming
• TX output power: -18 dbm to +3 dbm
• Received signal strength indicator (RSSI) with 1-dB resolution
• Low power mode support
• Up to 15 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ration (SNR) and liquid tolerance
• 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer
• Two serial communication blocks (SCBs) supporting I2C (master/slave), SPI (master/slave), or UART
• Four dedicated 16-bit timer, counter, or PWM blocks (TCPWMs)
• Programmable low-voltage detect (LVD) from 1.8 V to 4.5 V
• I2S master interface
• Bluetooth Low Energy protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles
• Switches between Central and Peripheral roles on-the-go
• Standard Bluetooth Low Energy profiles and services for interoperability
• Custom profile and service for specific use cases
• Proven, qualified, and certified hardware design ready to use
• Small footprint (10 × 10 mm × 1.80 mm), perfect for space constrained applications
• Reprogrammable architecture
• Fully certified module eliminates the time needed for design, development and certification processes
• Bluetooth SIG qualified with QDID and Declaration ID
• Flexible communication protocol support
• PSoC Creator provides an easy-to-use integrated design environment (IDE) to configure, develop, program, and test a Bluetooth LE application