آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

FANSTEL BC840M

Manufacturer	Fanstel
Mfr. Part Number	BC840M
Electland Part Code	290720
Electland Part Number	NYE_BC840M
Category	RF Transceiver Modules and Modems
Description	802.15.4, Bluetooth Bluetooth v5.0, Thread, Zigbee® Transceiver Module 2.4GHz PCB Trace Surface Mount
Datasheet	Download

Product Attributes

Category	RF and Wireless RF Transceiver Modules and Modems
RF Family/Standard	802.15.4, Bluetooth
Protocol	Bluetooth v5.0, Thread, Zigbee®
Frequency	2.4GHz
Data Rate	2Mbps
Power - Output	8dBm
Sensitivity	-96dBm
Serial Interfaces	ADC, GPIO, I2C, I2S, PWM, SPI, UART, USB
Antenna Type	PCB Trace
Utilized IC / Part	nRF52840-CKAA
Memory Size	1MB Flash, 256kB RAM
Voltage - Supply	1.7V ~ 5.5V
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C
Package / Case	64-SMD Module
Features	Hardware TRNG;OTA (Over-The-Air) upgrade;Encryption function
Packaging	LGA-64
ReachStatus	REACH Unknown
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	5A992C
HtsusCode	8517.62.0090
Weight	0.5g

Introduction

BluNor BC840 Series are powerful, highly flexible, ultra low power wireless modules using Nordic nRF52840 SoCs. With an ARM CortexTM M4F MCU, 1MB flash, 256KB RAM, embedded 2.4GHz multi-protocol transceiver, and an integrated antenna, it allows faster time to market with reduced development cost.

Features

nRF52840 CKAA, ARM Cortex M4F, 64 MHz ARM TrustZone Cryptocell - 310 co - processor
Complete RF solution with integrated antenna
BLE 5 data: 2Mbps,1Mbps,500kbps,125kbps
IEEE 802.15.4 Thread, Zigbee data: 250 Kbps
2.4 GHz proprietary data rate: 2 Mbps, 1 Mbps
DC - DC converter, inductors on board
Direct powered by Lithium batteries or USB supply (up to 5.5V)
32 MHz main crystal on board
Serial Wire Debug (SWD)
Nordic SoftDevice Ready
Over - the - Air (OTA) firmware update
Flash/RAM: 1MB/256KB
48 General purpose I/O pins
USB 2.0 full speed (12 Mbps) controller
QSPI 32 MHz interface
High speed 32 MHz SPI
Type 2 NFC - A tag with wake - on field, Touch - to - pair support
Programmable peripheral interconnect (PPI)
12 bit/200 Ksps ADC, 8 configurable channels with programmable gain
64 level comparator
15 level comparator with wake - up from OFF mode
Temperature sensor
4x4 - channel pulse width modulator (PWM)
Audio peripherals: I2S, digital microphone interface (PDM)
5x32 bit timers with counter mode
Up to 4x SPI masters/3x SPI slaves
Up to 2x I2C compatible 2 - wire masters/slaves
2x UART (CTS/RTS)
Quadrature Demodulator (QDEC)
3x real time counters (RTC)
128 - bit AES HW encryption
SoC Receiver Sensitivity: - 96 dBm at 1Mbps
SoC TX power: programmable +8 dBm to - 20dBm
LGA, 64 pins
Integrated PCB trace antenna
Operation voltage: 1.7V to 5.5V
Operation temperature: - 40°C to +85°C
FCC ID: X8WBC840M
IC IC: 4100A - BC840M
CE: Certified
Japan TELEC: 201 - 190140
Australia RCM: Certified
nRF52840 CKAA with Cortex M4F MCU
1MB flash, 256 KB RAM
Supports NFC
64 LGA pins
48 GPIOs