| Manufacturer | Radiocrafts AS |
|---|---|
| Mfr. Part Number | RC1880 |
| Electland Part Code | 290454 |
| Electland Part Number | NYE_RC1880 |
| Category | RF Transceiver Modules and Modems |
| Description | General ISM < 1GHz Transceiver Module 862MHz ~ 930MHz Antenna Not Included, Castellation Surface Mount |
| Datasheet | Download |
| Category | RF and Wireless RF Transceiver Modules and Modems |
|---|---|
| RF Family/Standard | General ISM < 1GHz |
| Modulation | 2FSK |
| Frequency | 862MHz ~ 930MHz |
| Data Rate | 50kbps |
| Power - Output | 14dBm |
| Sensitivity | -110dBm |
| Serial Interfaces | SPI, UART |
| Antenna Type | Antenna Not Included, Castellation |
| Utilized IC / Part | CC1310 |
| Memory Size | 128kB Flash, 20kB SRAM |
| Voltage - Supply | 1.8V ~ 3.8V |
| Current - Receiving | 24mA |
| Current - Transmitting | 32mA |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C |
| Package / Case | Module |
| Frequency Range | 868MHz;915MHz |
| interface | SPI;UART |
| Output Power(Max) | 14dBm |
| Packaging | Tape & Reel (TR) |
| Tariff Active | True |
| ReachStatus | REACH Unaffected |
| RohsStatus | ROHS3 Compliant |
| MoistureSensitivityLevel | Vendor Undefined |
| ExportControlClassNumber | 5A992C |
| HtsusCode | 8517.62.0090 |
| Weight | 0.5g |
The RC18x0 Radio Module platforms are a series of compact surface-mounted ultra-low power RF modules based on the CC1310 system-on-chip from Texas Instruments. The modules include a low power RF transceiver compliant to IEEE 802.15.4g and wireless MBus standard. The complete shielded module is only 12.7×25.4×3.7 mm and covers both 868 MHz and 915 MHz band. The RC1880 series of modules is a flexible platform in the sub-1 GHz bands, suitable to comply with a large number of standards. Among other systems, the modules comply with IEEE 802.15.4g and Wireless M-Bus. Using the module together with the TI-RTOS is a powerful combination to build any end application. Part of the TI-RTOS is programmed in ROM and using the operating system requires minimal of additional Flash. The modules are also supported by the open source operating system Contiki, through the CC1310 Contiki port. Using a pre-qualified module is the fastest way to make a wireless product and shortest time to market. The embedded RF HW and MCU resources in a 100% RF tested and pre-qualified module shorten the qualification and approval process. No RF design or RF expertise is required to add powerful wireless networking to the product. In most cases you only need supply voltage (for example an external battery) and a sensor/actuator and the module can run the entire application.
| QTY | USD | TOMAN |
|---|---|---|
| 1+ | $11.52 | 3,198,580 تومان |
| 200+ | $4.6 | 1,277,210 تومان |
| 500+ | $4.44 | 1,232,780 تومان |
| 1000+ | $4.37 | 1,213,350 تومان |