آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The RC18x2HP-IPM is a series of high-power sub-1 GHz programmable ultra-low power module for RIIM (Radiocrafts Industrial IP Mesh). It is based on the open radio standard IEEE802.15.4 g/e, and implements IPv6 internet addressing with support for UDP, CoAP and encryption. The RC18x2HP-IPM is used to implement all the nodes in the network including leaf nodes, wireless router nodes and root-node/border routers. The module includes ICI, the intelligent C-programmable I/O, along with all necessary drivers and the operating system. ICI allows the user to program his own intelligent sensor/actuator interface, or any other application with minimal effort. The programming capability of the module makes it possible to interface to any sensor/actuator or combination of sensors/actuators. Thereby removing the need for an additional MCU to reduce overall cost and power consumption.

Features

• Internet interoperability via IPv6 addressing, UDP packet transmission, DTLS encryption and CoAP protocol.
• Multi-hop mesh technology.
• Self-building and self-healing network.
• Over The Air (OTA) updates
• Very high node count mesh
• Long RF range, several hundred meters LOS
• Many electrical interfaces: 9 programmable GPIOs, I2C bus, SPI bus, UART and 2 ADC inputs
• Intelligent C-Programmable I/O (ICI) easy to use C-based SDK to directly interface any sensor/actuator
• Ultra-low power for coin cell battery or energy harvesting
• Pre-certified radio
• Based on open radio standards IEEE 802.15.4 g/e
• Frequency hopping via TSCH (6TiSCH) (Available for RIIM-SDK 1.20.0 and later)
• Automatic acknowledge and retransmission

Applications

• Coin cell battery systems
• IIoT applications
• Smart Sensor Technologies
• Energy Management and Sustainability
• Green House Monitoring and control
• Elderly Care
• Fire Detection
• Home Security
• Indoor Air Quality Monitoring
• Industrial Temperature Control
• Medical Climate Control
• Predictive Maintenance
• Tank Level/Flow Monitoring
• Facilities and Infrastructure Management
• Radiation and Leak Detection
• Irrigation monitor and control