آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

ESP-15F is a Wi-Fi module. Its core processor, the ESP8266, integrates a Tensilica L106 ultra-low-power 32-bit MCU in a compact package, featuring a 16-bit reduced mode, support for clock speeds of 80 MHz and 160 MHz, RTOS support, and integrated Wi-Fi MAC/BB/RF/PA/LNA.

The ESP-15F Wi-Fi module supports the standard IEEE 802.11b/g/n protocol and a complete TCP/IP stack. Users can use this module to add networking capability to existing devices or build standalone network controllers.

The ESP8266 is a high-performance wireless SoC that delivers maximum utility at minimum cost, offering unlimited possibilities for embedding Wi-Fi functionality into other systems.

The ESP8266 provides complete, self-contained Wi-Fi networking capability. It can operate as a standalone application or run as a slave co-processor alongside a host MCU. When operating standalone, the ESP8266 can boot directly from external flash. The built-in cache memory helps improve system performance and optimize the memory subsystem.

The ESP8266 can serve as a Wi-Fi adapter for any microcontroller-based design via SPI/SDIO or UART interface.

The ESP8266's powerful on-chip processing and storage capabilities allow it to integrate sensors and other application-specific devices through GPIO pins, significantly reducing upfront development costs.

Features

• Complete 802.11b/g/n Wi-Fi SOC module
• Built-in Tensilica L106 ultra-low-power 32-bit MCU, supporting 80 MHz and 160 MHz clock frequencies, RTOS-compatible
• Built-in 1-channel 10-bit high-precision ADC
• UART interface only
• PH2.54 connector / DIP-8 package
• Integrated Wi-Fi MAC/BB/RF/PA/LNA
• Multiple sleep modes supported, standby power consumption as low as 1.0mW
• Serial baud rate up to 4Mbps
• Embedded Lwip protocol stack
• STA/AP/STA+AP operating modes supported
• Supports Smart Config (APP) / AirKiss (WeChat) one-tap network provisioning for Android and iOS
• Supports local serial port OTA and remote firmware upgrade (FOTA)
• Standard AT commands for quick start
• Secondary development supported, with integrated Windows and Linux development environments
• 5V power supply supported