آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The Silicon Labs Z-Wave 700 SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions. It is an ideal solution for energy-friendly smart home control applications such as motion sensors, door/window sensors, access control, appliance control, building automation, energy management, lighting, and security networks in the “Internet of Things”. Built with low-power Gecko technology, which includes innovative low energy techniques, fast wake-up times and energy saving modes, the ZGM130S reduces overall power consumption and maximizes battery life. The module contains a native security stack and a comprehensive set of hardware peripherals usable for advanced device functionality, and offers 64 KB of flash memory for OEM applications.

Features

• TX power up to 14 dBm
• RX sensitivity @ 100 kbps: -103.9 dBm
• Range: up to 1 mile
• 9.8 mA RX current at 100 kbps, GFSK, 868 MHz
• 13.3 mA TX current at 0 dBm output power at 908 MHz
• 0.8 μA EM4H current (128 Byte RAM retention and RTCC running from LFRCO)
• 32-bit ARM Cortex -M4 core at 39 MHz
• Flash memory: 512 kB [64 kB Application]
• RAM: 64 kB (8 kB Application)
• Autonomous Hardware Crypto Accelerator and Random Number Generator
• Integrated DC-DC Converter
• Robust peripheral set and up to 32 GPIO
• External SAW filter optional
• Low Power Wireless System-on-Chip
• High Performance 32-bit, 39 MHz ARM Cortex -M4 with DSP instruction and floating-point unit for efficient signal processing
• Embedded Trace Macrocell (ETM) for advanced debugging
• 512 kB flash program memory (64 kB available for user applications)
• 64 kB RAM data memory (8 kB available for user applications)
• TX power up to 14 dBm
• Supports optional external SAW filter
• Low Energy Consumption
• 9.8 mA RX current at 100 kbps, GFSK, 868 MHz
• 40.1 mA TX current at 14 dBm output power at 912 MHz
• 40.7 mA TX current at 13 dBm output power at 868 MHz
• 13.3 mA TX current at 0 dBm output power at 908 MHz
• 69 μA/MHz in Active Mode (EM0)
• 0.8 μA EM4 current (128 Byte RAM retention and RTCC running from LFRCO)
• High Receiver Performance
• -97.9 dBm sensitivity at 100 kbit/s GFSK, 868 MHz
• -97.5 dBm sensitivity at 100 kbit/s GFSK, 915 MHz
• -103.9 dBm sensitivity at 100 kbit/s DSSS O-QPSK, 912 MHz
• Supported Protocols: Z-Wave, Z-Wave Long Range
• Support for Internet Security
• General Purpose CRC
• True Random Number Generator (TRNG)
• 2× Hardware Cryptographic Acceleration for AES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC
• Wide selection of MCU peripherals
• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)
• 2× Analog Comparator (ACMP)
• 2× Digital to Analog Converter (VDAC)
• 3× Operational Amplifier (Opamp)
• Digital to Analog Current Converter (IDAC)
• Low-Energy Sensor Interface (LESENSE)
• Multi-channel Capacitive Sense Interface (CSEN)
• 32 pins connected to analog channels (APORT) shared between analog peripherals
• 32 General Purpose I/O pins with output state retention and asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 2×16-bit Timer/Counter
• 3 or 4 Compare/Capture/PWM channels
• 1×32-bit Timer/Counter
• 3 Compare/Capture/PWM channels
• 32-bit Real Time Counter and Calendar
• 16-bit Low Energy Timer for waveform generation
• 32-bit Ultra Low Energy Timer/Counter for periodic wake-up from any Energy Mode
• 16-bit Pulse Counter with asynchronous operation
• 2× Watchdog Timer
• 3× Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)
• Low Energy UART (LEUART)
• 2×I²C interface with SMBus support and address recognition in EM3 Stop
• Wide Operating Range
• 1.8 V to 3.8 V single power supply
• Integrated DC-DC
• -40 °C to 85 °C

Applications

• Smart Home
• Security
• Lighting
• Health and Wellness
• Metering
• Building Automation