آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

MICROCHIP ATWILC3000-MR110CA

Manufacturer	MICROCHIP
Mfr. Part Number	ATWILC3000-MR110CA
Electland Part Code	288657
Electland Part Number	NYE_ATWILC3000-MR110CA
Category	RF Transceiver Modules and Modems
Description	Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz Integrated, Chip Surface Mount
Datasheet	Download

Product Attributes

Category	RF and Wireless RF Transceiver Modules and Modems
RF Family/Standard	Bluetooth, WiFi
Protocol	802.11b/g/n, Bluetooth v5.0
Frequency	2.4GHz
Data Rate	72.2Mbps
Power - Output	19dBm
Sensitivity	-95dBm
Serial Interfaces	I2C, SPI, UART
Antenna Type	Integrated, Chip
Voltage - Supply	1.62V~3.6V
Current - Receiving	68mA
Current - Transmitting	230mA
Mounting Type	Surface Mount
Operating Temperature	-40℃~+85℃
Package / Case	Module
interface	I2C;SPI;UART
Features	CRC check function;Supports FEC function
Output Power	18.5dBm
Receive Current	60.5mA
Current Of Transmitting	272mA;281mA;234mA;280mA;229mA;98.6mA
Packaging	SMD,22x14.7mm
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	5A992C
HtsusCode	8517.62.0090
Weight	0.0005g

Introduction

The ATWILC3000-MR110xA module is an IEEE 802.11 b/g/n RF/Baseband/Medium Access Control (MAC) link controller and Bluetooth 5.0 compliant module, optimized for low power mobile applications. This module supports single stream 1x1 IEEE 802.11n mode providing up to 72 Mbps PHY rate. The ATWILC3000-MR110xA module features small form factor when integrating Power Amplifier (PA), Low Noise Amplifier (LNA), Transmit/Receive switch and Power Management. The ATWILC3000-MR110CA integrates a chip antenna while the ATWILC3000- MR110UA adds a micro co-ax (u.FL) connector for connecting to an external antenna. This module offers very low power consumption while simultaneously providing high performance. This module contains all circuitry required including a 26 MHz crystal, PMU circuitry and a chip antenna or a micro co-ax (u.FL) RF connector. The ATWILC3000-MR110xA module requires a 32.768 kHz clock for sleep operation. The ATWILC3000-MR110xA module utilizes highly optimized IEEE 802.11 Bluetooth coexistence protocols and provides Serial Peripheral Interface (SPI) and Secure Digital Input Output (SDIO) for interfacing with the host controller.

Features

IEEE 802.11 b/g/n RF/PHY/MAC SOC
IEEE 802.11 b/g/n (1x1) for up to 72 Mbps PHY rate
Single spatial stream in 2.4 GHz ISM band
Integrated PA and T/R switch
Integrated chip antenna or u.FL micro co-ax connector for connecting to an external antenna
Superior sensitivity and range via advanced PHY signal processing
Advanced equalization and channel estimation
Advanced carrier and timing synchronization
Wi-Fi Direct and Soft-AP support
Supports IEEE 802.11 WEP, WPA, WPA2 and WPA2 Enterprise security
Superior MAC throughput through hardware accelerated two-level A-MSDU/A-MPDU frame aggregation and block acknowledgment
On-chip memory management engine to reduce host load
SPI and SDIO host interfaces
Operating conditions:
- Input/Output operating voltage (VDDIO): 1.62V to 3.6V
- Power supply for DC/DC Convertor (VBAT): 2.5V to 4.2V
- Operating temperature: -40°C to +85°C
Wi-Fi Alliance certified for connectivity and optimizations: ID: WFA72428
Bluetooth 5.0 (Basic Rate, Enhanced Data Rate and Bluetooth Low Energy)
Frequency hopping
Host Control Interface (HCI) through high speed UART
Integrated PA and T/R switch
Superior sensitivity and range
Bluetooth SIG 5.0 certification: Declaration ID: D039158