آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The CC3135MOD is an FCC, IC/ISED, ETSI/CE, MIC, and Wi-Fi CERTIFIED module that can significantly simplify the implementation process of Internet connectivity. This dual-band Wi-Fi network processor module can be added to any low-cost, low-power microprocessor unit (MCU). It integrates all Wi-Fi and Internet protocols, greatly reducing the software requirements of the host MCU. This ROM-based subsystem includes an 802.11 a/b/g/n dual-band 2.4GHz and 5GHz radio, baseband, and a MAC with a powerful hardware encryption engine. With built-in security protocols, the CC3135MOD solution provides a robust and simple security experience.

The CC3135MOD comes in an LGA package, making it easy to arrange all necessary components, including serial flash, RF filters, duplexers, crystals, and fully integrated passive components. This generation introduces new features that further simplify IoT connectivity.

The main new features of the CC3135MOD include:

• 802.11 a/b/g/n: 2.4GHz and 5GHz support
• Coexistence of 2.4GHz with low-power Bluetooth radio
• Antenna diversity
• Enhanced security with an internal IC verified to FIPS 140 - 2 Level 1: Authentication allows up to 16 secure sockets to be opened simultaneously
• Unique device identifier
• Ability to generate a certificate signing request (CSR)
• Online Certificate Status Protocol (OCSP)
• Wi-Fi Alliance certification with IoT low-power capabilities
• Hostless mode to reduce template packet transmission load
• Improved fast scanning

The CC3135MOD device family is part of the SimpleLink MCU platform, which is a common and easy-to-use development environment based on a single-core software development kit (SDK) with a rich set of tools and reference designs. The E2E community supports Wi-Fi, low-power Bluetooth, Sub - 1GHz devices, and host MCUs.

Features

• Fully integrated Green/RoHS module including all required clocks, SPI flash, and passive components
• Integrated Wi-Fi and Internet protocols
• 802.11a/b/g/n: 2.4GHz and 5GHz
• Certified by FCC, IC/ISED, ETSI/CE, and MIC
• FIPS 140-2 Level 1 validated internal IC with a rich set of IoT security features to help developers protect data
• Low-power modes for battery-powered applications
• 2.4GHz radio coexistence
• Industrial temperature: -40℃ to +85℃
• Wi-Fi network processor subsystem:
  • Wi-Fi core:
    • 802.11 a/b/g/n 2.4GHz and 5GHz
    • Modes:
      • Access Point (AP)
      • Station (STA)
      • Wi-Fi Direct (supported on 2.4GHz only)
• Security:
  • WEP
  • WPA/WPA2 PSK
  • WPA2 Enterprise
  • WPA3 Personal
  • WPA3 Enterprise
• Internet and application protocols:
  • HTTP server, mDNS, DNS-SD, and DHCP
  • IPv4 and IPv6 TCP/IP stack
  • 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
• Built-in power management subsystem:
  • Configurable low-power profiles (always-on, intermittent connection, tag)
  • Advanced low-power modes
  • Integrated DC/DC regulator
• Application throughput
  • UDP: 16Mbps
  • TCP: 13Mbps
• Multi-layered security features:
  • Separate execution environment network security
  • Device identity and keys
  • Hardware accelerator crypto engine (AES, DES, SHA/MD5, and CRC)
  • File system security (encryption, authentication, access control)
  • Secure initial programming software tamper detection
  • Secure boot
  • Certificate Signing Request (CSR)
  • Unique key pair per device
• Recovery mechanism — ability to restore factory defaults
• Power management subsystem:
  • Integrated DC/DC converter supporting wide supply voltage range:
    • Single supply voltage, VBAT: 2.3V to 3.6V
  • Advanced low-power modes:
    • Shutdown: 1µA, Hibernate: 5.5µA
    • Low-Power Deep Sleep (LPDS): 115µA
    • Idle connected (MCU in LPDS): 710µA
    • RX traffic (MCU in active mode): 53mA
    • TX traffic (MCU in active mode): 223mA
  • Wi-Fi TX power
    • 2.4 GHz: 16dBm at 1 DSSS
    • 5 GHz: 15.1dBm at 6 OFDM
  • Wi-Fi RX sensitivity
    • 2.4 GHz: -94.5dBm at 1 DSSS
    • 5 GHz: -89dBm at 6 OFDM
• Additional integrated components on module
  • 40.0MHz crystal with internal oscillator
  • 32.768kHz crystal (RTC)
  • 32-Mbit SPI serial flash
  • RF filters, duplexers, and passive components
• QFM package
  • 1.27mm pitch, 63-pin, 20.5mm × 17.5mm QFM package for easy assembly and low-cost PCB design
• Module supports SimpleLink developer ecosystem

Applications

• Medical and Healthcare
  • Multi-parameter patient monitors
  • Electrocardiogram (ECG)
  • Electronic hospital beds and bed controllers
  • Telehealth systems
• Building and Home Automation
  • HVAC systems and thermostats
  • Video surveillance, video doorbells, and low-power cameras
  • Building security systems and electronic locks
  • Appliance asset tracking
  • Factory automation
  • Grid infrastructure