آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The CYBLE-012011-00 is a Bluetooth Low Energy wireless module solution. It is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and the PSoC 4 Bluetooth LE.

The CYBLE-012011-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I²C, UART, SPI) through its programmable architecture. It includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package.

The CYBLE-012011-00 is fully certified and qualified and is an ideal fit for cost sensitive applications.

Features

• Castellated solder pad connections for ease-of-use
• 128-KB flash memory, 16-KB SRAM memory
• Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
• Bluetooth 5.1 qualified single-mode module
• Certified to FCC, ISED, MIC, KC, and CE regulations
• Industrial temperature range: -40 °C to +85 °C
• 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
• Watchdog timer with dedicated internal low-speed oscillator (ILO)
• Two-pin SWD for programming
• Up to 22 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ratio (SNR) and liquid tolerance
• 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer
• Two serial communication blocks (SCBs) supporting I2C (master/slave), SPI (master/slave), or UART
• Four dedicated 16-bit timer, counter, or PWM blocks (TCPWMs)
• LCD drive supported on all GPIOs (common or segment)
• Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
• I²S master interface
• Bluetooth Low Energy protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles
• Switches between Central and Peripheral roles on-the-go
• Standard Bluetooth Low Energy profiles and services for interoperability
• Custom profile and service for specific use cases
• Proven hardware design ready to use
• Cost optimized for applications without space constraint, Footprint
• Reprogrammable architecture
• Fully certified module eliminates the time needed for design, development and certification processes
• Bluetooth SIG qualified with QDID and Declaration ID
• Flexible communication protocol support
• PSoC Creator provides an easy-to-use integrated design environment (IDE) to configure, develop, program, and test a Bluetooth LE application