آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The BlueNRG-M0 is an easy to use Bluetooth low energy master/slave network processor module, compliant with Bluetooth v4.2. The BlueNRG-M0 module supports multiple roles simultaneously, and can act at the same time as Bluetooth low energy sensor and hub device. The entire Bluetooth low energy stack and protocols are embedded into BlueNRGM0 module. The external host application processor, where the application resides, is connected to the BlueNRG-M0 module through a standard SPI interface. The BlueNRG-M0 module provides a complete RF platform in a tiny form factor. Radio, antenna, high frequency and LPO oscillators are integrated to offer a certified solution to optimize the time-to-market of the final applications. The BlueNRG-M0 can be powered directly with a standard coin cell battery, a pair of AAA batteries or any power source from 1.7 to 3.6 V.

The BlueNRG-M0 is a single-mode Bluetooth low energy master/slave network processor module compliant with Bluetooth v4.2. The BlueNRG-M0 module has been designed around the ST BlueNRG-MS network processor, on which a complete power-optimized stack for Bluetooth single mode protocol runs, providing Master, slave role support GAP: central, peripheral, observer or broadcaster roles ATT/GATT: client and server SM: privacy, authentication and authorization L2CAP Link Layer: AES-128 encryption and decryption The BlueNRG-MS radio embeds non-volatile Flash memory allows on-field stack upgrading. In addition, according to the Bluetooth specification v4.2, the BlueNRG-M0 module provides: Multiple roles simultaneously support Support simultaneous advertising and scanning Support being slave of up to two masters simultaneously Privacy V1.1 Low duty cycle directed advertising Connection parameters request procedure LE Ping 32 bits UUIDs L2CAP connection oriented channels The BlueNRG-M0 module is equipped with Bluetooth low energy profiles in C source code, available for the ST radio BlueNRG-MS. The external host application processor, where the application resides, is interfaced with the BlueNRG-M0 module through an application controller interface protocol, which is based on a standard SPI interface. The BlueNRG-M0 module enables wireless connectivity into electronic devices, not requiring any RF experience or expertise for integration into the final product. The BlueNRG-M0 module provides a complete RF platform in a tiny form factor and being a certified solution optimizes the time-to-market of the final applications. The BlueNRG-M0 module allows applications to meet of the tight advisable peak current requirements imposed with the use of standard coin cell batteries. Optimized results are obtained when the embedded high-efficiency DC-DC step-down converter is used (BLUENRG-M0A). Instead, concerning the BLUENRG-M0L the best performance in terms of power consumption is achieved using a 1.8V DC power supply. The BlueNRG-M0 can be powered directly with a standard coin cell battery, a pair of AAA batteries or any power source from 1.7 to 3.6 V.

Features

• Bluetooth v4.2 compliant
• Supports master and slave modes
• Multiple roles supported simultaneously
• Embedded Bluetooth low energy protocol stack GAP, GATT, SM, L2CAP, LL, RFPHY
• Bluetooth low energy profiles provided separately
• Embedded ST BlueNRG-MS network processor
• Up to +8 dBm available output pow
• Down to -88 dBm Rx sensitivity
• Up to 96 dB link budget with excellent link reliability
• SPI, IRQ, and RESET
• On-field stack upgrading available via SPI
• AES security co-processor
• CE qualified
• FCC, IC modular approval certified
• TYPE qualified
• BQE qualified
• WPC certification (BlueNRG-M0L)
• On-board chip antenna
• Operating supply voltage: from 1.7 to 3.6 V
• Operating temperature range: -40 °C to 85 °C

Applications

• Watches
• Fitness, wellness and sports
• Consumer medical
• Security/proximity
• Remote control
• Home and industrial automation
• Assisted living
• Mobile phone peripherals
• PC peripherals