آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

The SimpleLink CC2650MODA device is a wireless microcontroller (MCU) module, primarily suitable for low-power Bluetooth applications. The CC2650MODA device is also applicable to ZigBee, 6LoWPAN, and ZigBee RF4CE remote control applications. This module is based on the SimpleLink CC2650 wireless MCU and belongs to the cost-effective, ultra-low-power 2.4GHz RF devices of the CC26xx series. It features extremely low active RF and MCU currents, as well as low power consumption in low-power modes, ensuring excellent battery life. It is suitable for being powered by small coin-cell batteries and for use in energy harvesting applications.

The CC2650MODA module contains a 32-bit ARM Cortex - M3 processor (operating at the same frequency of 48MHz as the main processor) and has a rich set of peripheral functions, including a unique ultra-low-power sensor controller. This sensor controller is well-suited for connecting external sensors or for autonomously collecting analog and digital data when the rest of the system is in sleep mode. Therefore, the CC2650MODA device is an ideal choice for various applications in industrial, consumer electronics, and medical products.

The CC2650MODA module is pre-certified and can operate in accordance with FCC, IC, ETSI, and ARIB specifications. These certifications can save customers a significant amount of cost and effort when integrating this module into their products.

The Bluetooth Low Energy controller and IEEE 802.15.4 MAC are embedded in the ROM and run independently on the ARM Cortex - M0 processor. This architecture can improve the overall system performance and power consumption and free up more flash memory for applications. The Bluetooth Low Energy software stack (BLE - Stack) and the ZigBee software stack (Z - Stack) are available for free.

Features

• Microcontroller: ARM Cortex-M3
• EEMBC CoreMark score: 142
• Clock speed up to 48MHz
• 128KB in-system programmable flash
• 8KB cache SRAM
• 20KB ultra-low leakage SRAM
• 2-pin cJTAG and JTAG debug
• OTA upgrade support
• Ultra-low power sensor controller: operates autonomously, independent of the rest of the system
• 16-bit architecture with 2KB ultra-low leakage SRAM for code and data storage
• Efficient code size architecture with drivers, low-power Bluetooth controller, IEEE 802.15.4 MAC, and bootloader in ROM
• Integrated antenna
• Peripherals: all digital peripheral pins mappable to any GPIO
• Four general-purpose timer modules (8×16-bit or 4×32-bit, all with PWM)
• 12-bit ADC, 200 ksps, 8-channel analog multiplexer
• Duration comparator
• Ultra-low power analog comparator
• Programmable current source
• UART
• 2× SSI (SPI, MICROWIRE, and TI)
• I2C
• I2S
• RTC
• AES-128 security module
• TRNG
• 15× GPIO
• Support for eight capacitive sensing buttons
• Integrated temperature sensor
• External system: on-chip internal DC/DC converter
• No external components required — supply voltage only
• Low power consumption
• Wide supply voltage range
• Operating voltage range: 1.8V to 3.8V
• Active mode RX: 6.2mA
• Active mode TX (0dBm): 6.8mA
• Active mode TX (+5dBm): 9.4mA
• Active mode MCU: 61µA/MHz
• Active mode MCU: 48.5 CoreMark/mA
• Active mode sensor controller: 0.4mA + 8.2μA/MHz
• Standby current: 1μA (RTC running, RAM/CPU retention)
• Shutdown current: 100nA (wake on external event)
• RF section: 2.4GHz RF transceiver compliant with BLE 5.1 and IEEE 802.15.4 PHY and MAC
• Compliant with CC2650MODA RF-PHY standard (QDID: 88415)
• Excellent receiver sensitivity (−97dBm for BLE, −100dBm for 802.15.4), selectivity, and blocking performance
• Programmable output power up to +5dBm
• Pre-certified for global RF regulatory compliance
• ETSI RED (Europe)
• IC (Canada)
• FCC (United States)
• ARIB STD-T66 (Japan)
• JATE (Japan)
• Tools and development environment: full-featured, low-cost development kit
• Multiple reference designs for different RF configurations
• Packet sniffer PC software
• Sensor Controller Studio
• SmartRF Studio
• SmartRF Flash Programmer 2
• IAR Embedded Workbench (for ARM)
• Code Composer Studio

Applications

• Building automation
• Medical and healthcare
• Appliances
• Industrial
• Consumer electronics
• Proximity tags
• Alarms and security
• Remote control
• Wireless sensor networks