آر اف (فرکانس رادیویی) و بی‌سیم ماژول‌ فرستنده‌گیرنده و مودم آر اف

Product Attributes

Introduction

ESPC5-12E Wi-Fi6 2.4G and 5 GHz plus Bluetooth coexistence module is a highly integrated single-chip low-power 802.11b/g/n/ax WLAN network controller. It integrates a 240MHz CPU, WLAN MAC, 1T1R-capable WLAN baseband, RF, and Bluetooth functions on a single chip. It also provides a large number of configurable GPIOs that can be configured as digital peripherals for various application and control purposes. ESPC5-12E integrates a rich set of peripherals, including SPI, parallel IO, ADC, UART, I²C, I²S, RMT, LED PWM, USB serial, JTAG controller, MCPWM, SDIO 2.0 slave controller, GDMA, Twai controller, on-chip JTAG debugging, event task matrix, and up to 19 GPIOs. ESPC5-12E contains an IEEE 802.15.4-compliant subsystem with integrated PHY and MAC layers, supporting multiple software protocol stacks including Thread, ZigBee, Matter, HomeKit, and MQTT. The module uses ESP32-C5 as the Wi-Fi and Bluetooth coexistence SoC, integrating built-in memory for complete Wi-Fi protocol functionality, while its embedded memory configuration also facilitates application development. The ESPC5-12E module supports the standard IEEE 802.11 b/g/n/ax protocol and a full TCP/IP stack, allowing users to add Wi-Fi capability to existing devices or use it as a standalone network controller.

Features

• Chip: ESP32-C5HF4
• Module dimensions: 16mm × 24mm × 3mm
• Single-core RISC-V microprocessor, up to 240MHz
• 320KB ROM
• 384KB HP SRAM + 16KB LP SRAM
• Wi-Fi 2.4GHz & 5GHz, 1T1R
• IEEE 802.11 b/g/n/ax compliant
• Operating channel center frequency range: 2412 ~ 2484 MHz, 5180 ~ 5885MHz
• Data rate up to 150 Mbps in 1T1R mode
• 20MHz and 40MHz bandwidth support
• TX/RX A-MPDU, TX/RX A-MSDU support
• Immediate Block ACK support
• 802.11 mc FTM support
• Bluetooth® 5, supporting Bluetooth LE and Bluetooth Mesh
• Data rates: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
• Advertising Extension support
• Multiple advertising sets support
• Channel Selection Algorithm #2 support
• Low-power power control support
• IEEE 802.15.4-2015 compliant
• 2.4GHz band OQPSK PHY
• Data rate: 250 Kbps
• Thread 1.3 support
• ZigBee 3.0 support
• Peripheral interfaces: GPIO × 19; I²C; I²S; SDIO; CAN FD; SPI; EN; MCPWM; ADC; LED PWM
• Operating temperature: -40℃ ~ 125℃

Applications

• Serial transparent transmission
• Wi-Fi probe
• Smart home
• Camera products
• Sensor network