آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The CC1310 is a cost-effective, ultra-low-power 2.4GHz and sub-1GHz RF device from the CC26xx and CC13xx family. It features extremely low active RF and MCU current consumption, along with flexible low-power modes, ensuring exceptional battery life for long-range operation powered by small coin-cell batteries and energy harvesting applications.

The CC1310 is the first device in the sub-1GHz line of cost-effective, ultra-low-power wireless MCUs. The CC1310 combines a flexible ultra-low-power RF transceiver with a powerful 48MHz Cortex-M3 MCU on a platform supporting multiple physical layers and RF standards. A dedicated wireless controller (Cortex-M0) handles low-level RF protocol commands stored in ROM or RAM, ensuring ultra-low power consumption and flexibility. The CC1310 achieves low power without compromising RF performance, delivering excellent sensitivity and robustness (selectivity and blocking).

The CC1310 is a highly integrated, true single-chip solution that incorporates a complete RF system and an on-chip DC-DC converter.

Sensors can be processed in an ultra-low-power manner by a dedicated ultra-low-power autonomous MCU, which can be configured to handle both analog and digital sensors, allowing the main MCU (Cortex-M3) to maximize sleep time.

The CC1310 power and clock management and wireless system require specific configuration and software handling for proper operation, all of which has been implemented in TI-RTOS. TI recommends using this software framework for all application development targeting this device. The complete TI-RTOS and device drivers are available free of charge in source code form.

Features

• Microcontroller:
  • Powerful ARM Cortex-M3 processor
  • EEMBC CoreMark score: 142
  • EEMBC ULPBench score: 158
  • Clock rate up to 48MHz
  • 32KB, 64KB, and 128KB in-system programmable flash
  • 8KB cache SRAM (or for general-purpose RAM use)
  • 20KB ultra-low leakage SRAM
  • 2-pin cJTAG and JTAG debug
  • OTA upgrade support
• Ultra-low-power sensor controller:
  • Operates autonomously, independent of the rest of the system
  • 16-bit architecture
  • 2KB ultra-low leakage code and data SRAM
• Efficient code size architecture with TI-RTOS, drivers, and bootloader components placed in ROM
• RoHS-compliant packages:
  • 7mm × 7mm RGZ VQFN48 package (30 GPIO)
  • 5mm × 5mm RHB VQFN32 package (15 GPIO)
  • 4mm × 4mm RSM VQFN32 package (10 GPIO)
• Peripherals:
  • All digital peripheral pins mappable to any GPIO
  • Four general-purpose timer modules (8×16-bit or 4×32-bit, all with PWM)
  • 12-bit ADC, 200MSPS, 8-channel analog multiplexer
  • Continuous-time comparator
  • Ultra-low-power clock comparator
  • Programmable current source
  • UART
  • 2× SSI (SPI, MICROWIRE, and TI)
  • I2C, I2S
  • RTC
  • AES-128 security module
  • TRNG
  • 8 capacitive-sensing button support
  • Integrated temperature sensor
• External system:
  • On-chip internal DC-DC converter
  • Seamless integration with SimpleLink CC1190 range extender
• Low power:
  • Wide supply voltage range: 1.8 to 3.8V
  • RX: 5.4mA
  • TX (at +10dBm): 13.4mA
  • Active-mode MCU at 48MHz running Coremark: 2.5mA (51µA/MHz)
  • Active-mode MCU: 48.5 CoreMark/mA
  • Active-mode sensor controller (24MHz): 0.4mA + 8.2μA/MHz
  • Sensor controller, one wake-up per second for one 12-bit ADC sample: 0.95μA
  • Standby current: 0.7μA (RTC running, RAM and CPU retained)
  • Shutdown current: 185nA (wake-up on external event)
• RF section:
  • Excellent receiver sensitivity: −124dBm in long-range mode; −110dBm at 50kbps (sub-1GHz)
  • Excellent selectivity (±100kHz): 56dB
  • Excellent blocking performance (±10MHz): 90dB
  • Programmable output power: up to +9dBm
  • Single-ended or differential RF interface
  • Suitable for systems compliant with worldwide RF regulations
  • ETSI EN 300 220 and EN 303 204 (Europe)
  • FCC CFR47 Part 15 (US)
  • ARIB STD-T108 (Japan)
  • Wireless M-Bus and selected IEEE 802.15.4g PHY
• Tools and development environment:
  • Full-featured, low-cost development kit
  • Multiple reference designs for different RF configurations
  • Packet sniffer PC software
  • Sensor Controller Studio
  • SmartRF Studio
  • SmartRF Flash Programmer 2
  • IAR Embedded Workbench (for ARM)
  • Code Composer Studio