آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The CC1310 is a member of the CC26xx and CC13xx family of cost-effective, ultra-low-power, 2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current consumption, in addition to flexible low-power modes, provide excellent battery lifetime and allow long-range operation on small coin-cell batteries and in energy-harvesting applications. The CC1310 device is the first device in a Sub-1 GHz family of cost-effective, ultra-low-power wireless MCUs. The CC1310 device combines a flexible, very low power RF transceiver with a powerful 48-MHz Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance. The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC-DC converter. Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Cortex-M3) can maximize sleep time. The CC1310 power and clock management and radio systems require specific configuration and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI recommends using this software framework for all application development on the device. The complete TI-RTOS and device drivers are offered in source code free of charge.

Features

• Powerful ARM Cortex-M3 Processor – EEMBC CoreMark Score: 142 – EEMBC ULPBench Score: 158 – Clock Speed up to 48-MHz
• 32KB, 64KB, and 128KB of In-System Programmable Flash
• 8KB of SRAM for Cache (or as General-Purpose RAM)
• 20KB of Ultra-Low-Leakage SRAM
• 2-Pin cJTAG and JTAG Debugging
• Supports Over-the-Air (OTA) Update
• Ultra-Low-Power Sensor Controller – Can Run Autonomously From the Rest of the System – 16-Bit Architecture – 2KB of Ultra-Low-Leakage SRAM for Code and Data
• Efficient Code-Size Architecture, Placing Parts of TI-RTOS, Drivers, and Bootloader in ROM
• RoHS-Compliant Package – 7mm×7mm RGZ VQFN48 (30 GPIOs) – 5mm×5mm RHB VQFN32 (15 GPIOs) – 4mm×4mm RSM VQFN32 (10 GPIOs)
• Peripherals – All Digital Peripheral Pins Can Be Routed to Any GPIO – Four General-Purpose Timer Modules (Eight 16-Bit or Four 32-Bit Timers, PWM Each) – 12-Bit ADC, 200 ksamples/s, 8-Channel Analog MUX – Continuous Time Comparator – Ultra-Low-Power Clocked Comparator – Programmable Current Source – UART – 2× SSI (SPI, MICROWIRE, TI) – I2C, I2S – Real-Time Clock (RTC) – AES-128 Security Module – True Random Number Generator (TRNG) – Support for Eight Capacitive Sensing Buttons – Integrated Temperature Sensor
• External System – On-Chip Internal DC-DC Converter – Seamless Integration With the SimpleLink CC1190 Range Extenders
• Low Power – Wide Supply Voltage Range: 1.8 to 3.8 V – RX: 5.4 mA – TX at +10 dBm: 13.4 mA – Active-Mode MCU 48 MHz Running Coremark: 2.5 mA (51 μA/MHz) – Active-Mode MCU: 48.5 CoreMark/mA – Active-Mode Sensor Controller at 24 MHz: 0.4 mA + 8.2 μA/MHz – Sensor Controller, One Wakeup Every Second Performing One 12-Bit ADC Sampling: 0.95 μA – Standby: 0.7 μA (RTC Running and RAM and CPU Retention) – Shutdown: 185 nA (Wakeup on External Events)
• RF Section – Excellent Receiver Sensitivity –124 dBm Using Long-Range Mode, –110 dBm at 50 kbps (Sub-1 GHz) – Excellent Selectivity (±100 kHz): 56 dB – Excellent Blocking Performance (±10 MHz): 90 dB – Programmable Output Power up to +15 dBm – Single-Ended or Differential RF Interface – Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations • ETSI EN 300 220, EN 303 204 (Europe) • FCC CFR47 Part 15 (US) • ARIB STD-T108 (Japan) Wireless M-Bus and Selected IEEE 802.15.4g PHY
• Tools and Development Environment – Full-Feature and Low-Cost Development Kits – Multiple Reference Designs for Different RF Configurations – Packet Sniffer PC Software – Sensor Controller Studio – SmartRF Studio – SmartRF Flash Programmer 2 – IAR Embedded Workbench for ARM – Code Composer Studio

Applications

• 315-, 433-, 470-, 500-, 779-, 868-, 915-, 920-MHz ISM and SRD Systems
• Low-Power Wireless Systems With 50-kHz to 5-MHz Channel Spacing
• Home and Building Automation
• Wireless Alarm and Security Systems
• Industrial Monitoring and Control
• Smart Grid and Automatic Meter Reading
• Wireless Healthcare Applications
• Wireless Sensor Networks
• Active RFID
• IEEE 802.15.4g, IP-Enabled Smart Objects (6LoWPAN), Wireless M-Bus, KNX Systems, Wi-SUN, and Proprietary Systems
• Energy-Harvesting Applications
• Electronic Shelf Label (ESL)
• Long-Range Sensor Applications
• Heat-Cost Allocators