آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The CC1310 is a cost-effective, ultra-low-power 2.4GHz and sub-1GHz RF device in the CC26xx and CC13xx family. Its extremely low active RF and MCU current consumption, combined with flexible low-power modes, ensures outstanding battery life for long-range operation powered by small coin cell batteries and energy harvesting applications.

The CC1310 is the first device in the sub-1GHz series of cost-effective, ultra-low-power wireless MCUs. The CC1310 combines a flexible ultra-low-power RF transceiver with a powerful 48MHz Cortex-M3 MCU on a platform supporting multiple physical layers and RF standards. A dedicated wireless controller (Cortex-M0) handles low-level RF protocol commands stored in ROM or RAM, ensuring ultra-low power consumption and flexibility. The CC1310 achieves low power without compromising RF performance, delivering excellent sensitivity and robustness (selectivity and blocking).

The CC1310 is a highly integrated, true single-chip solution that incorporates a complete RF system and an on-chip DC-DC converter.

Sensors can be processed in an ultra-low-power manner by a dedicated ultra-low-power autonomous MCU, which can be configured to handle both analog and digital sensors, allowing the main MCU (Cortex-M3) to maximize sleep time.

The CC1310 power and clock management and wireless system require specific configuration and software handling for correct operation, all of which is implemented in TI-RTOS. TI recommends using this software framework for all application development targeting this device. The complete TI-RTOS and device drivers are available free of charge in source code form.

Features

• Microcontroller: High-performance ARM Cortex-M3 processor
• EEMBC CoreMark score: 142
• EEMBC ULPBench score: 158
• Clock rate up to 48MHz
• 32KB, 64KB, and 128KB in-system programmable flash
• 8KB cache SRAM (or used as general-purpose RAM)
• 20KB ultra-low leakage SRAM
• 2-pin cJTAG and JTAG debug
• Over-the-Air (OTA) upgrade support
• Ultra-low power sensor controller: operates autonomously, independent of the rest of the system
• 16-bit architecture
• 2KB ultra-low leakage code and data SRAM
• Efficient code size architecture with TI-RTOS, drivers, and bootloader components placed in ROM
• RoHS-compliant packages: 7mm × 7mm RGZ VQFN48 (30 GPIO)
• 5mm × 5mm RHB VQFN32 (15 GPIO)
• 4mm × 4mm RSM VQFN32 (10 GPIO)
• Peripherals: all digital peripheral pins mappable to any GPIO
• Four general-purpose timer modules (8×16-bit or 4×32-bit, all with PWM)
• 12-bit ADC, 200MSPS, 8-channel analog multiplexer
• Duration comparator
• Ultra-low power clock comparator
• Programmable current source
• UART
• 2× SSI (SPI, MICROWIRE, and TI)
• I2C, I2S
• RTC
• AES-128 security module
• True Random Number Generator (TRNG)
• Supports eight capacitive sensing buttons
• Integrated temperature sensor
• External system: on-chip internal DC-DC converter
• Seamless integration with SimpleLink CC1190 range extender
• Low power: wide supply voltage range: 1.8 to 3.8V
• RX: 5.4mA
• TX (at +10dBm): 13.4mA
• Active mode MCU at 48MHz running Coremark: 2.5mA (51µA/MHz)
• Active mode MCU: 48.5 CoreMark/mA
• Active mode sensor controller (24MHz): 0.4mA + 8.2μA/MHz
• Sensor controller, wake once per second for one 12-bit ADC sample: 0.95μA
• Standby current: 0.7μA (RTC running, RAM and CPU retained)
• Shutdown current: 185nA (wake on external event)
• RF section: excellent receiver sensitivity: -124dBm in long-range mode; -110dBm at 50kbps (sub-1GHz)
• Excellent selectivity (±100kHz): 56dB
• Excellent blocking performance (±10MHz): 90dB
• Programmable output power: up to +9dBm
• Single-ended or differential RF interface
• Suitable for systems complying with worldwide RF regulations
• ETSI EN 300 220 and EN 303 204 (Europe)
• FCC CFR47 Part 15 (US)
• ARIB STD-T108 (Japan)
• Wireless M-Bus and selected IEEE 802.15.4g PHY
• Tools and development environment: full-featured, low-cost development kit
• Multiple reference designs for different RF configurations
• Packet sniffer PC software
• Sensor Controller Studio
• SmartRF Studio
• SmartRF Flash Programmer 2
• IAR Embedded Workbench (for ARM)
• Code Composer Studio